| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Cheese it! The fuzz! http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=23784 |
Page 1 of 1 |
| Author: | ayavner [ Sun Sep 13, 2009 6:50 pm ] |
| Post subject: | Cheese it! The fuzz! |
Hi all, I am rounding the corner on this OM build, starting to prep for finish. I sanded the top to 220 with a backing block and gently wiped it with a damp cloth to raise the grain. After that dried, i sanded it again and it looked utterly beautiful and silky smooth. I sprayed a washcoat of lacquer over it, just a thin mist to seal it and I notice now that the entire surface has little grains standing up, as they say here in the South, "like they're fixin to meet the Lord". Looks like it needs a shave! Is this normal? I assume now with the sealer coat, after i give it overnight to dry, that all the grain should now be brittle and should sand right off and no further should come up? Or am I going to be fighting this between every coat? Did I do something wrong, or am I just being paranoid? Thanks! Adam |
|
| Author: | Pat Foster [ Sun Sep 13, 2009 6:55 pm ] |
| Post subject: | Re: Cheese it! The fuzz! |
ayavner wrote: . . . . . Or am I going to be fighting this between every coat? Did I do something wrong, or am I just being paranoid? Thanks! Adam Sand lightly and recoat, repeat if necessary, but it probably won't be. Just because you can't hear the voices doesn't mean they're not there.  Pat |
|
| Author: | ayavner [ Tue Sep 15, 2009 4:11 pm ] |
| Post subject: | Re: Cheese it! The fuzz! |
Yup, looks like that did the trick. Thanks! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|