Tony:
I am new to guitars but are those dimensions in thous. ?
Bob
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Back brace dimensions http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=26495 |
Page 1 of 1 |
| Author: | Gregg C [ Fri Mar 12, 2010 9:14 am ] |
| Post subject: | Back brace dimensions |
Good morning guys, My plans (Dred) show the two upper bout back braces thin and tall, the two lower bout back braces are shown wide and short. I would prefer using four thin tall braces, Can someone suggest a thickness and height for these braces ?? Should upper and lower bout braces be the same thickness and height ?? Gregg |
|
| Author: | Brad Goodman [ Fri Mar 12, 2010 9:26 am ] |
| Post subject: | Re: Back brace dimensions |
Hi Gregg, I make all 4 the same size generally about 1/4" X 3/4" high. To start then plane and scallop from there. Brad |
|
| Author: | TonyKarol [ Fri Mar 12, 2010 12:55 pm ] |
| Post subject: | Re: Back brace dimensions |
front two .. 280x590 back two ... 400x590 |
|
| Author: | unkabob [ Fri Mar 12, 2010 8:41 pm ] |
| Post subject: | Re: Back brace dimensions |
Tony: I am new to guitars but are those dimensions in thous. ? Bob
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|