Thank you both! Ordered the "T" joint belt from Klinspor, I am looking forward to some smooooth sanding...
thanks,
Damon
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| smooth splice sanding belts? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=29493 |
Page 1 of 1 |
| Author: | Lindamon [ Fri Oct 15, 2010 9:51 am ] |
| Post subject: | smooth splice sanding belts? |
I recently bought a large (80") belt sander, but the belts that came with it have a nasty hump at the splice, knocking the work away from the belt as the splice moves by it. My smaller 4' belt sander does not do this, but I thought I would ask if anyone knows of a good brand belt with a smother splice for larger sanders. I have tensioned the belt according to the instructions. thanks, Damon |
|
| Author: | Bob Garrish [ Fri Oct 15, 2010 10:48 am ] |
| Post subject: | Re: smooth splice sanding belts? |
I've been very impressed with belts from these guys: http://customsandingbelts.com/ I ordered a sample for my sponge sander and ended up ordering a whole box (which will take me a very long time to empty!) |
|
| Author: | Howard Klepper [ Fri Oct 15, 2010 11:35 am ] |
| Post subject: | Re: smooth splice sanding belts? |
Klingspor. |
|
| Author: | Lindamon [ Fri Oct 15, 2010 1:43 pm ] |
| Post subject: | Re: smooth splice sanding belts? |
Thank you both! Ordered the "T" joint belt from Klinspor, I am looking forward to some smooooth sanding... thanks, Damon |
|
| Author: | JRE Productions [ Fri Oct 15, 2010 2:52 pm ] |
| Post subject: | Re: smooth splice sanding belts? |
The most recent belts I bought for my smaller 4x24" unit are aweful. THey have a huge bump everytime the seam comes around. Learned my lesson about discount belts. J |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|