| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| purfling glues http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=29598 |
Page 1 of 1 |
| Author: | dberkowitz [ Fri Oct 22, 2010 8:33 am ] |
| Post subject: | purfling glues |
What are people playing with for laminating veneer sheets for purflings? |
|
| Author: | Stephen Boone [ Fri Oct 22, 2010 8:59 am ] |
| Post subject: | Re: purfling glues |
I use Titebond. I make sure to give it a full 24 hour cure. |
|
| Author: | WaddyThomson [ Fri Oct 22, 2010 9:06 am ] |
| Post subject: | Re: purfling glues |
Even at 24 hours you may get some curling of wider glue ups. I have been known to wet it down after 24 hours, clamp it between a couple of pieces of melamine shelving and let it dry for another 48 hours. |
|
| Author: | Mark Groza [ Fri Oct 22, 2010 9:13 am ] |
| Post subject: | Re: purfling glues |
I use titebond and wait 3 days to dry. I also use melamine shelves. |
|
| Author: | Steve Kinnaird [ Fri Oct 22, 2010 9:14 am ] |
| Post subject: | Re: purfling glues |
Like Stephen, I've used Titebond, however I used the Titebond III. My thinking was permanence since I was planning on bending the laminated strips on a hot iron. Steve |
|
| Author: | WaddyThomson [ Fri Oct 22, 2010 10:23 am ] |
| Post subject: | Re: purfling glues |
I've been using LMI White too. I love how hard it dries. It's right up there with Hide and Fish glue. Pretty much have quit using Titebond of any kind. Haven't tried Gorilla White, but have been hearing good things about it. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|