| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| What is the best way to do the end graft http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=29664 |
Page 1 of 1 |
| Author: | Michael Smith [ Tue Oct 26, 2010 10:06 pm ] |
| Post subject: | What is the best way to do the end graft |
I'm trying to figure the best way to do the end graft on this tenor ukulele. Would it be best to do a mitered corner. or just do the smaller edge then route over it on the curved end graft. The chalk like if roughly where my end graft will be. All this after the top is on. |
|
| Author: | TonyKarol [ Wed Oct 27, 2010 7:15 am ] |
| Post subject: | Re: What is the best way to do the end graft |
I do similar to Chris on cutaway points ... for yours, start with the routed ledge against a fence, then create a template to do the curved section. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|