I've heard that hide glue causes double posting.
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Fretboard gluing http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=31055 |
Page 1 of 1 |
| Author: | Juss [ Wed Feb 09, 2011 4:12 pm ] |
| Post subject: | Fretboard gluing |
Hi Just wanted to ask whatkind of glue do you guys prefere to gluing fretboars on neck. Wood glue or epoxy? Thanks Juss |
|
| Author: | Rod True [ Wed Feb 09, 2011 4:40 pm ] |
| Post subject: | Re: Fretboard gluing |
Epoxy |
|
| Author: | Steve Saville [ Wed Feb 09, 2011 4:57 pm ] |
| Post subject: | Re: Fretboard gluing |
Fish glue. |
|
| Author: | Fred Tellier [ Wed Feb 09, 2011 5:13 pm ] |
| Post subject: | Re: Fretboard gluing |
I have used Titebond in the past and epoxy now, both work fine. I have thought of using fish as Steve suggests but have not yet tried it. Fred |
|
| Author: | Arnt Rian [ Wed Feb 09, 2011 5:31 pm ] |
| Post subject: | Re: Fretboard gluing |
I've gone back to fish glue, after a few too visible glue lines with epoxy. Mostly perator error, I'm sure, but my results with hide glue are better, so... |
|
| Author: | J Hewitt [ Wed Feb 09, 2011 5:42 pm ] |
| Post subject: | Re: Fretboard gluing |
Hide glue...never had any problems with it yet |
|
| Author: | J Hewitt [ Wed Feb 09, 2011 5:42 pm ] |
| Post subject: | Re: Fretboard gluing |
Hide glue...never had any problems with it yet |
|
| Author: | Dan Pennington [ Wed Feb 09, 2011 6:04 pm ] |
| Post subject: | Re: Fretboard gluing |
I've heard that hide glue causes double posting.
|
|
| Author: | J Hewitt [ Wed Feb 09, 2011 6:32 pm ] |
| Post subject: | Re: Fretboard gluing |
yea really...maybe that means it bonds twice as strong 
|
|
| Author: | TonyKarol [ Wed Feb 09, 2011 6:54 pm ] |
| Post subject: | Re: Fretboard gluing |
Titebond for everything except coco .. then its epoxy .. I also glue my FBs on pretty hefty neck blanks, I dont get any warping when using it as some say they do. Plus, I level/radius the FB after its glued on the neck, neck rough shaped, and bolted to the body. |
|
| Author: | Haans [ Wed Feb 09, 2011 6:59 pm ] |
| Post subject: | Re: Fretboard gluing |
LMI. |
|
| Author: | WendyW [ Thu Feb 10, 2011 6:05 pm ] |
| Post subject: | Re: Fretboard gluing |
Which Titebond are you using, I, II , or III? |
|
| Author: | Jody [ Fri Feb 11, 2011 8:45 pm ] |
| Post subject: | Re: Fretboard gluing |
I use thick super glue for the fret board to the neck, and tightbond original for the fretboard to the body . its a ich removing a fingerboard, but it will never creep, even if left in a high temp situation ..jody |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|