| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| OLF SJ Questions - new moulds coming! http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=31512 |
Page 1 of 1 |
| Author: | Shane Neifer [ Fri Mar 18, 2011 9:46 am ] |
| Post subject: | OLF SJ Questions - new moulds coming! |
One of my customers has ordered a outside form for the OLF SJ and I will be making the bending forms as well for this a few other guitar shapes on the CNC. Will someone tell me how far down from the neck end of the guitar is the centre of the soundhole? I will be using that point for indexing. Thanks Shane |
|
| Author: | Ziegenfuss [ Fri Mar 18, 2011 3:48 pm ] |
| Post subject: | Re: OLF SJ Questions - new moulds coming! |
Shane, The center of the soundhole is 5 7/8 inch from the tangency where the neck joins the body. Stephen |
|
| Author: | Shane Neifer [ Fri Mar 18, 2011 4:21 pm ] |
| Post subject: | Re: OLF SJ Questions - new moulds coming! |
Awesome! Thanks Stephen. Shane |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|