| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Dread top/back resonance query... http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=31541 |
Page 1 of 1 |
| Author: | meddlingfool [ Sun Mar 20, 2011 6:07 pm ] |
| Post subject: | Dread top/back resonance query... |
I'm about to try tuning back and top plates using FFT for the first time. Can anyone suggest a good resonant pitch to aim for before attaching to the rims? From what I understand the pitch will go up when attached to the sides, but down when the bridge goes on. I'm aiming for around 180 hz after gluing with bridge. Anyone have any advice? Thanks |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|