| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Pick guard two sided adhesive http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=31758 |
Page 1 of 1 |
| Author: | Gregg C [ Wed Apr 06, 2011 6:04 am ] |
| Post subject: | Pick guard two sided adhesive |
Good morning guys, I purchased a couple of rosewood pick guards on ebay, Is there a supplier where I can buy a very thin two sided adhesive ?? Gregg |
|
| Author: | Ti-Roux [ Wed Apr 06, 2011 6:21 am ] |
| Post subject: | Re: Pick guard two sided adhesive |
Hey! Check out with Tesa, it's a industrial tape company i found recently. Really great stuff. www.tesatape.com I think you could just call them and ask for a free sample. By the way, I have seen in the past double sided tape that apply only glue. That is very thin. Good luck, Francis |
|
| Author: | Gregg C [ Wed Apr 06, 2011 6:37 am ] |
| Post subject: | Re: Pick guard two sided adhesive |
Excellent !! Thanks you guys for the quick replays, Todd, I had no idea Stew Mac had it. Gregg |
|
| Author: | Darrel Friesen [ Wed Apr 06, 2011 6:05 pm ] |
| Post subject: | Re: Pick guard two sided adhesive |
You can get it at scrapbooking stores too. I only know that from pilfering my wife's supplies. |
|
| Author: | cphanna [ Wed Apr 06, 2011 6:37 pm ] |
| Post subject: | Re: Pick guard two sided adhesive |
This is more a comment on my own technique than the two-sided adhesive. I used it on a little mandolin pick guard, and thought I had it rubbed down very well. When I tuned the instrument up, the pick guard buzzed against the top at a couple of frequencies. If this happens to you, don't freak out. Warm the area gently with a hair drier, then burnish it down again. After I did that, mine was fine. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|