Three votes for the scarf. Worked fine with ebony (duh
), rosewood and I've even done it with figured maple. It's tricky though to get the flamey bits to line up right.
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| EIR weiss binding source? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=31917 |
Page 1 of 1 |
| Author: | alan stassforth [ Wed Apr 20, 2011 7:30 pm ] |
| Post subject: | EIR weiss binding source? |
I need some EIR binding for a Weiss style. 40" long (x4). .060" x 1/4" +-. I could make them myself if somebody has a piece big enough to get them out of. |
|
| Author: | Pat Redmiles [ Wed Apr 20, 2011 8:08 pm ] |
| Post subject: | Re: EIR weiss binding source? |
Try Gilmer wood. Look under "cane blanks" - they're frequently as long as 40" and make great binding stock. Pretty inexpensive, too, compared to buying presized binding strips. |
|
| Author: | Freeman [ Thu Apr 21, 2011 9:10 am ] |
| Post subject: | Re: EIR weiss binding source? |
I just bound my koa weissenborn in curly maple with a splice along the straight part of the neck - you can hardly see the joint. I guess that would be one big advantage of rope binding - you could splice it anywhere you wanted. However if you do need long pieces, Bruce at Notable Tonewoods cut my sides, he might be able to also supply the bindings. Made a funky mold for the Fox bender - worked great for both the sides and the bindings. |
|
| Author: | alan stassforth [ Thu Apr 21, 2011 10:07 am ] |
| Post subject: | Re: EIR weiss binding source? |
Thanks all. I've tried Allied, and a couple of local luthiers if they had any sticks laying around. I'll try calling LMI today, and if no go, have Chris do it. I wanted to go bindingless on this one, but, well, the joint was ALMOST there. Also, want to keep it real simple, with siris and rosewood only. |
|
| Author: | Mike Dotson [ Fri Apr 22, 2011 4:18 pm ] |
| Post subject: | Re: EIR weiss binding source? |
Three votes for the scarf. Worked fine with ebony (duh ), rosewood and I've even done it with figured maple. It's tricky though to get the flamey bits to line up right.
|
|
| Author: | nickton [ Fri Apr 22, 2011 10:41 pm ] |
| Post subject: | Re: EIR weiss binding source? |
you da man todd!  ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
|
|
| Author: | alan stassforth [ Sat Apr 23, 2011 12:35 am ] |
| Post subject: | Re: EIR weiss binding source? |
Nice job, Todd. You can't see that joint until the microscope pic. You've inspired me to try a joint like that. Maybe I'll try just 2 joints instead of 3, and skip the end graft splice. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|