| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| truss rod instal http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=51501 |
Page 1 of 1 |
| Author: | mikemcnerney [ Wed Jan 23, 2019 5:01 pm ] |
| Post subject: | truss rod instal |
I am using the LMI one way truss rod & having the adjustment at the peghead. In his video he mounts it low for that installation & puts in a very thin shim. But when mounted where you adjust at the heal he just keeps it flush with no shim. Can't I just do it without a shim? Mike |
|
| Author: | DennisK [ Wed Jan 23, 2019 7:39 pm ] |
| Post subject: | Re: truss rod instal |
Link to the video or product page? You can probably do it without a shim, but I'd like to see exactly what it is you're working with. |
|
| Author: | Barry Daniels [ Fri Jan 25, 2019 12:48 pm ] |
| Post subject: | Re: truss rod instal |
It's called a spline. |
|
| Author: | SnowManSnow [ Sat Jan 26, 2019 3:22 pm ] |
| Post subject: | Re: truss rod instal |
You can do it without a spline yes. Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|