| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Stewmac Herringbone Plans Bridge Plate http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=51519 |
Page 1 of 1 |
| Author: | jeisenman [ Sat Jan 26, 2019 11:21 pm ] |
| Post subject: | Stewmac Herringbone Plans Bridge Plate |
Hi all, wondering if anyone else sees a problem with the placement of the bridge plate on the stewmac herringbone plans? Seems like it is too close to the X, or too small because the belly of the bridge would overhang it by 1/4", and there is around 1/4" on the front side of where the bridge "should" be if the 14th fret is within 1/16 of the body. The fret scale is also not drawn accurately, and the bridge placement isn't right. I called them and they said I was the first person to ask about it, and that it was drawn off of a 60's D28 Herringbone. Insights? |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|