Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

New Luthier Tips du Jour video - LMI Bridge Drill jig
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=51525		 Page 1 of 1
Author:  Robbie O'Brien [ Mon Jan 28, 2019 11:37 am ]
Post subject:  New Luthier Tips du Jour video - LMI Bridge Drill jig
Here is the latest Luthier Tips du Jour video. - In this video I show how to drill six bridge holes in a straight line using the LMI Bridge Drill Jig. This is the old version of this jig. They now have a new and improved version. This video as well as all my other videos are available via my website, http://www.obrienguitars.com/videos , LMI's website or on youtube.
Author:  Colin North [ Mon Jan 28, 2019 11:43 am ]
Post subject:  Re: New Luthier Tips du Jour video - LMI Bridge Drill jig
Hmm, a cross slide vise is infinitely adjustable, covers any spread at the bridge and you can angle the bridge pin holes. Just sayin'...
Author:  LarryH [ Mon Jan 28, 2019 12:06 pm ]
Post subject:  Re: New Luthier Tips du Jour video - LMI Bridge Drill jig
Thanks Robbie, as always, for taking the time to post your tips...
Author:  Robbie O'Brien [ Mon Jan 28, 2019 12:07 pm ]
Post subject:  Re: New Luthier Tips du Jour video - LMI Bridge Drill jig
LarryH wrote:
Thanks Robbie, as always, for taking the time to post your tips...

Thank you Larry!
Author:  Clay S. [ Mon Jan 28, 2019 12:25 pm ]
Post subject:  Re: New Luthier Tips du Jour video - LMI Bridge Drill jig
If you are only concerned with keeping the holes in a straight line you can do that by clamping a fence on the table of the drill press. The jig helps you maintain the same distance between holes as well.
Author:  SnowManSnow [ Mon Jan 28, 2019 2:54 pm ]
Post subject:  Re: New Luthier Tips du Jour video - LMI Bridge Drill jig
Thanks Robbie. Always appreciated


Sent from my iPhone using Tapatalk
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/