Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Dec 11, 2024 2:58 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Z poxy wash coat ratio ?
PostPosted: Sun Feb 10, 2019 11:08 am 
Offline
Mahogany
Mahogany

Joined: Sun Mar 18, 2018 2:51 pm
Posts: 77
Looking for a ratio of z poxy to alcohol ratio for the final wash coats? I sanded through in a few spots due to inexperience. Now I think I understand the process better but for this one I need a wash coat. I really thinned down a batch probably 50:1. It helped but still can see the spots with bare wood.


Top
 Profile  
 
PostPosted: Sun Feb 10, 2019 12:16 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2524
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
I do a 50:50 mix.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter


Top
 Profile  
 
PostPosted: Sun Feb 10, 2019 12:48 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5505
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
One and a good splash.
Probably about 12/15:1. It flashes off quickly, probably give it about 3 quick wipes, each with a new wipe - you can see it cover as you build it up.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
PostPosted: Sun Feb 10, 2019 8:04 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro
Enough DNA to make it “wash”. I don’t measure


Top
 Profile  
 
PostPosted: Mon Feb 11, 2019 6:25 am 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
I just did this process a week ago, and didn’t measure. I got the epoxy mixed to the lowest line to get it accurate 2 part, mixed it.... then filled the rest of the mixing cup with solvent.
I used acetone instead of dna. It seemed to go in smoother , but maybe I’m crazy.


Sent from my iPhone using Tapatalk


Top
 Profile  
 
PostPosted: Mon Feb 11, 2019 5:30 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro
I've used DNA for the wash coat for a long time. I've never seen it react negatively (though I was warned by some it might if overly thinned). Snowman's use is an experiment of one. I've never heard of anyone doing that (except for that video of the guy using lacquer thinner). Lets see how his process works out. I will say all wash coat stuff I read or saw mentioned DNA. Has anyone here used another solvent besides DNA?


Top
 Profile  
 
PostPosted: Mon Feb 11, 2019 7:01 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5505
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
Isopropyl alcohol here, no problems.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: doncaparker and 24 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com