| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| That's not a plane - this is a plane http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=51623 |
Page 1 of 1 |
| Author: | Ruby50 [ Mon Feb 18, 2019 5:06 pm ] |
| Post subject: | That's not a plane - this is a plane |
All remarkable, but you won't believe at 2:40 https://www.youtube.com/watch?v=6Ubv3kS9fhs Ed |
|
| Author: | Casey Cochran [ Mon Feb 18, 2019 5:14 pm ] |
| Post subject: | Re: That's not a plane - this is a plane |
They should go into the boutique toilet paper business. |
|
| Author: | SteveSmith [ Mon Feb 18, 2019 5:28 pm ] |
| Post subject: | Re: That's not a plane - this is a plane |
That 300mm plane is really something! |
|
| Author: | sdsollod [ Mon Feb 18, 2019 5:38 pm ] |
| Post subject: | Re: That's not a plane - this is a plane |
Scary Sharp! |
|
| Author: | Carey [ Mon Feb 18, 2019 6:53 pm ] |
| Post subject: | Re: That's not a plane - this is a plane |
Good stuff! The guy seen at around 1:30, and later, is something else... Mr. Kamijo. Saw him at the Kezurokai event in Berkeley CA circa 2001, and gleaned everything I could. |
|
| Author: | Chris Pile [ Mon Feb 18, 2019 7:05 pm ] |
| Post subject: | Re: That's not a plane - this is a plane |
The craftsmanship is high, of course - but what really pleased me was all the young bucks in the competition. Good to see young folks interested in an ancient tradition of skill and knowledge. |
|
| Author: | Carey [ Mon Feb 18, 2019 7:20 pm ] |
| Post subject: | Re: That's not a plane - this is a plane |
Chris Pile wrote: The craftsmanship is high, of course - but what really pleased me was all the young bucks in the competition. Good to see young folks interested in an ancient tradition of skill and knowledge. Agreed- and not just in Japan. |
|
| Author: | Mike OMelia [ Mon Feb 18, 2019 7:38 pm ] |
| Post subject: | Re: That's not a plane - this is a plane |
Casey Cochran wrote: They should go into the boutique toilet paper business. You don't think slivers might happen? |
|
| Author: | klooker [ Tue Feb 19, 2019 8:37 am ] |
| Post subject: | Re: That's not a plane - this is a plane |
I think I would have gone into debt at the chisel table. |
|
| Author: | SteveSmith [ Tue Feb 19, 2019 10:12 am ] |
| Post subject: | Re: That's not a plane - this is a plane |
klooker wrote: I think I would have gone into debt at the chisel table. Ha ha, yeah, lots of candy there. |
|
| Author: | Dave m2 [ Tue Feb 19, 2019 12:04 pm ] |
| Post subject: | Re: That's not a plane - this is a plane |
Remarkable as you say - I don't quite see us in the West doing this sort of competition! Dave |
|
| Author: | Ernie Kleinman [ Tue Feb 19, 2019 1:41 pm ] |
| Post subject: | Re: That's not a plane - this is a plane |
300mm Kanna wow! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|