| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| 16" Berlin Machinery Jointer http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=51666 |
Page 1 of 1 |
| Author: | Alaska Splty Woods [ Thu Feb 28, 2019 3:42 pm ] |
| Post subject: | 16" Berlin Machinery Jointer |
Maybe a long shot, but ya never know unless one asks. We have this Jointer we just don't need. It's a babbet bearing machine.. A working museum piece.. With a hooked up to a belt shaft line, It would be right at home. Anyway I purchased this machine from a cabinet shop in Freeland Washington on Widbey Island 12+ yrs ago, and we just don't need it in our process. We have a blower and 25" Miller Wide Belt Sander to sell also. Also for the guy that doesn't have 3phase power available at their shop and wants it, I have a Roto-Phase phase converter[single phase to 3 phase] that I built out of a 25HP 3ph motor. Here is a link to the jointer listing. https://juneau.craigslist.org/tls/d/cra ... 49842.html |
|
| Author: | Rod True [ Thu Feb 28, 2019 4:13 pm ] |
| Post subject: | Re: 16" Berlin Machinery Jointer |
Hey Brent, Don't know if you have, but might want to post that on old woodworking machines forum too http://www.owwm.org/ |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|