| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Mandolin Truss Rod... http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=51860 |
Page 1 of 1 |
| Author: | meddlingfool [ Fri Apr 26, 2019 2:10 am ] |
| Post subject: | Mandolin Truss Rod... |
Any recces for a two way rod for 13.875 scale? |
|
| Author: | pkdz [ Fri Apr 26, 2019 7:49 am ] |
| Post subject: | Re: Mandolin Truss Rod... |
You could try Japarts.They are in Vancouver and ship from Japan Super friendly and great service. |
|
| Author: | DannyV [ Fri Apr 26, 2019 9:57 am ] |
| Post subject: | Re: Mandolin Truss Rod... |
2 way!!! Bill never used a 2 way!!! hahaha There you go. Bucking tradition...... again! |
|
| Author: | mountain whimsy [ Fri Apr 26, 2019 10:47 am ] |
| Post subject: | Re: Mandolin Truss Rod... |
Allied will build it to whatever length you want. |
|
| Author: | violinvic [ Sat Apr 27, 2019 1:37 pm ] |
| Post subject: | Re: Mandolin Truss Rod... |
Just out of curiosity, why a two way??? |
|
| Author: | meddlingfool [ Sat Apr 27, 2019 2:04 pm ] |
| Post subject: | Re: Mandolin Truss Rod... |
Because two way rods are great! |
|
| Author: | Joe Beaver [ Sat Apr 27, 2019 3:04 pm ] |
| Post subject: | Re: Mandolin Truss Rod... |
Because two way rods are great! Yes they are! Blanchard will also make to your spec. A little pricey perhaps but a great rod. http://www.blanchardguitars.com/guitarp ... _rods.html |
|
| Author: | meddlingfool [ Sat Apr 27, 2019 3:29 pm ] |
| Post subject: | Re: Mandolin Truss Rod... |
I went with this... https://cumberlandacoustic.com/product/ ... russ-rods/ Not too keen on the square ends, but so be it... |
|
| Author: | CarlD [ Sat Apr 27, 2019 3:48 pm ] |
| Post subject: | Re: Mandolin Truss Rod... |
Did you check these? https://www.bitterrootguitars.com/Truss ... s/1916.htm |
|
| Author: | Mike Collins [ Sat Apr 27, 2019 4:10 pm ] |
| Post subject: | Re: Mandolin Truss Rod... |
I have 6 Stew mac Hotrod rods for a mandolin. Let me know the length you need. These are 2 way. Mike |
|
| Author: | meddlingfool [ Sat Apr 27, 2019 5:01 pm ] |
| Post subject: | Re: Mandolin Truss Rod... |
Doh! I've ordered from bitterroot before too. Alas, my aged brain... Mike, a pair got put in the mail this AM, but thanks! |
|
| Author: | Tim Mullin [ Sat Apr 27, 2019 5:17 pm ] |
| Post subject: | Re: Mandolin Truss Rod... |
violinvic wrote: Just out of curiosity, why a two way??? ‘Cause when an instrument develops a backbow, a 2-way rod can save your ass. I have two Instruments in the shop at the moment, both made by the same name-brand overseas manufacturer. Both had backbowed necks. The one with the 2-way was simple to setup, without drama. We’ve struggled with the other and have concluded there’s nothing left to do but a really agressive fret level. Not ideal. Plenty of good instruments on the market with 2-way rods — no reason to settle for a one-way unless it is for vintage value. Sent from my iPad using Tapatalk |
|
| Author: | meddlingfool [ Sat Apr 27, 2019 5:53 pm ] |
| Post subject: | Re: Mandolin Truss Rod... |
I particularly like them at the fret levelling stage... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|