| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Fret wire supplier, who makes the best? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=51937 |
Page 1 of 1 |
| Author: | David Newton [ Thu May 16, 2019 11:31 am ] |
| Post subject: | Fret wire supplier, who makes the best? |
I have used Jescar forever, but am currently unhappy with their barbs, as in not much there. I am looking into another Mfg. "Polymet". Does anyone have personal experience with their wire, and are the barbs well shaped and prominent? |
|
| Author: | Joe Beaver [ Thu May 16, 2019 4:09 pm ] |
| Post subject: | Re: Fret wire supplier, who makes the best? |
I have been using Jescar for awhile and I like it. But it is from a coil I bought 8-10 years ago. Has the quality changed? |
|
| Author: | bluescreek [ Thu May 16, 2019 5:29 pm ] |
| Post subject: | Re: Fret wire supplier, who makes the best? |
been using jecsar not issues they have plenty of barbs Dunlop is also good |
|
| Author: | David Newton [ Thu May 16, 2019 10:42 pm ] |
| Post subject: | Re: Fret wire supplier, who makes the best? |
Yes there are plenty of barbs, but on this last roll they don't stick out very far from the tang. |
|
| Author: | wbergman [ Fri May 17, 2019 5:18 am ] |
| Post subject: | Re: Fret wire supplier, who makes the best? |
Have you contacted Jescar to see if they would like to examine a piece of the wire? |
|
| Author: | David Newton [ Sat May 18, 2019 9:56 pm ] |
| Post subject: | Re: Fret wire supplier, who makes the best? |
No. Maybe I'll ask them who makes a wire with better barbs. I think I'll just order a bit from another supplier. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|