Trying to find a formula for neck/fretboard width up the neck. What's the standard vintage Fender space from string slot to the edge of the fretboard?
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Neck width? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=52010 |
Page 1 of 1 |
| Author: | KawaiianPunch [ Wed Jun 05, 2019 12:55 pm ] |
| Post subject: | Neck width? |
Trying to find a formula for neck/fretboard width up the neck. What's the standard vintage Fender space from string slot to the edge of the fretboard?
|
|
| Author: | Joe Beaver [ Wed Jun 05, 2019 4:04 pm ] |
| Post subject: | Re: Neck width? |
Don't know much about Fender electrics but I use 1/8" on the low E and 5/32" on the high e. That probably won't work on a 1-5/8" nut |
|
| Author: | KawaiianPunch [ Wed Jun 05, 2019 7:09 pm ] |
| Post subject: | Re: Neck width? |
Joe Beaver wrote: Don't know much about Fender electrics but I use 1/8" on the low E and 5/32" on the high e. That probably won't work on a 1-5/8" nut I don't know why I assumed luthier to encompass stringed instruments that are electric.  I'll find an appropriate forum.
|
|
| Author: | Barry Daniels [ Wed Jun 05, 2019 9:19 pm ] |
| Post subject: | Re: Neck width? |
Some of us work on electrics too. 1/8" works for them too. In fact, string bending might want you to go a bit more. It kind of depends on fret bevels, the parallelness of the neck, etc. I just usually eyeball it. |
|
| Author: | Colin North [ Thu Jun 06, 2019 5:07 am ] |
| Post subject: | Re: Neck width? |
I normally used 3 to 3.5 mm treble, maybe slightly less bass. depending n the player. I'm not often on it myself, but I believe you'll find a thriving section of this forum dedicated to electrics. http://www.luthiersforum.com/forum/viewforum.php?f=10123 |
|
| Author: | Clay S. [ Thu Jun 06, 2019 7:40 am ] |
| Post subject: | Re: Neck width? |
"I don't know why I assumed luthier to encompass stringed instruments that are electric. I'll find an appropriate forum."We are not just "Martin Luthiers" - we do work on different brands. Your initial query was for a formula for neck/fretboard width up the neck. I don't know of one for either acoustic or electric. There are some general guidelines, such as, as the fret space narrows the neck usually widens, but even this doesn't hold true for all fretted instruments. If you ask a question for which no one has the answer you may not get a response. |
|
| Author: | rlrhett [ Thu Jun 06, 2019 8:37 pm ] |
| Post subject: | Re: Neck width? |
KawaiianPunch wrote: Joe Beaver wrote: Don't know much about Fender electrics but I use 1/8" on the low E and 5/32" on the high e. That probably won't work on a 1-5/8" nut I don't know why I assumed luthier to encompass stringed instruments that are electric. I'll find an appropriate forum.I don’t believe Joe told you you were on the wrong forum. He was just giving you a context to his answer. That is how this forum works. We share our experiences in the hope that helps. Some of us have more relevant experience, and some have related experience that may actually expand your knowledge and give you a bigger picture. If you were looking for definitive answers from Fender technical support, perhaps you are right. This may not be the forum for you. Sent from my iPhone using Tapatalk Pro |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|