| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Gift card for WC http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=52072 |
Page 1 of 1 |
| Author: | banjopicks [ Fri Jun 21, 2019 8:04 am ] |
| Post subject: | Gift card for WC |
I got a gift card from my daughter for $75 at Woodcraft. Sorry OLF sponsors, she only knows I like Woodcraft. Anyway, I'm thinking some cool measuring tools and I'd like some input on your favorites for guitar building. Stuff that you use and love. Thanks |
|
| Author: | bcombs510 [ Fri Jun 21, 2019 9:43 am ] |
| Post subject: | Re: Gift card for WC |
If you don't have one already, you could get out the door tax included (in most states) with this: https://www.woodcraft.com/products/veri ... ning-guide |
|
| Author: | Woodie G [ Fri Jun 21, 2019 9:50 am ] |
| Post subject: | Re: Gift card for WC |
Woodcraft seems to sell less and less of what we need, but they still carry Starrett and Pfeil carving tools. On my list would be: 1. The 4" Starrett double square (~$98)...perfect in the apron 2. The Starrett automatic center punch (~$42)...accurate punch for any material 3. The 6" combination square (~$106)...much handier than the 12" version 4. The 16mm Pfeil Swiss Made #1 Flat double bevel carving chisel (~$43)...my favorite brace carving tool |
|
| Author: | rbuddy [ Fri Jun 21, 2019 10:54 am ] |
| Post subject: | Re: Gift card for WC |
I bought this 24" combi square rule hoping for enough quality in graduations and straightness I could keep my Starrett 387-24 shop control standard in it's box and safe from shop mishaps. I was pleasantly surprised by how well it matched up to the Starrett. The Pinnacle is best graduated straightedge for the money I've found yet and I often recommend it. And you can use it with a combination square when you need a long one. https://www.woodcraft.com/products/pinnacle-24-combination-square-blade-only |
|
| Author: | Joe Beaver [ Fri Jun 21, 2019 11:18 am ] |
| Post subject: | Re: Gift card for WC |
Something on this page perhaps? https://www.woodcraft.com/categories/calipers These always are needed. My most used for shaping necks is the woodriver 4 in 1. https://www.woodcraft.com/categories/files-rasps I would say scrapers but I am addicted to the Carruth Ultimate Scraper from StewMac |
|
| Author: | banjopicks [ Tue Jun 25, 2019 7:58 am ] |
| Post subject: | Re: Gift card for WC |
I have a real cheap digital caliper (.002: resolution") and I think this might be a good upgrade. A new microplane may be something as well. If you haven't tried one for shaping a neck, you should. I love them and have shaped about 8 necks with mine and it still works but not like new. I have a round and a flat. I'm leaning towards these things, I have plenty of straight edges and squares and chisels. A double bevel chisel sounds interesting. I'll check them out. I'll be going next week or the week after, I'm not sure. |
|
| Author: | banjopicks [ Sat Jul 06, 2019 9:18 am ] |
| Post subject: | Re: Gift card for WC |
So the day is here, what will I do. I'm considering the carving vise now. I'm not sure it's something I need or just another shop toy. Then there's the great wood selection. |
|
| Author: | banjopicks [ Sat Jul 06, 2019 11:51 am ] |
| Post subject: | Re: Gift card for WC |
Carving vise it is. I can't wait to install it. It's almost neck carving time. |
|
| Author: | Joe Beaver [ Sat Jul 06, 2019 12:33 pm ] |
| Post subject: | Re: Gift card for WC |
If this is the vise you are talking about I have one that is very similar. I use mine nearly every 'building' day. Don't know what I would do without it. Great choice!!! I took a piece of strap leather and lined the jaws. You can also use cork. |
|
| Author: | banjopicks [ Sat Jul 06, 2019 12:44 pm ] |
| Post subject: | Re: Gift card for WC |
That's it. I figured it would be the most useful tool. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|