This is how I do mine.
Sent from my iPhone using Tapatalk
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| 00 Martin 12 fret http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=52186 |
Page 1 of 1 |
| Author: | Ruby50 [ Tue Jul 16, 2019 4:46 pm ] |
| Post subject: | 00 Martin 12 fret |
Hey all About a month ago I asked if anyone knew the whereabouts of plans for an 00 sized 14 fret Martin. Got good responses and a couple to choose from. I have decided to go with a 12 fret Martin 00 size. I can't seem to find a set of plans for one. Anybody? Prefer the era with the scalloped braces if possible. Thanks Ed |
|
| Author: | surveyor [ Tue Jul 16, 2019 6:32 pm ] |
| Post subject: | Re: 00 Martin 12 fret |
I got plans for a 12 fret Martin-0 from these folks. Other than a slight difference on the outline of the body, the rest should be about the same. https://cadguitarplans.com/ |
|
| Author: | Casey Cochran [ Tue Jul 16, 2019 6:55 pm ] |
| Post subject: | Re: 00 Martin 12 fret |
John Arnold did a drawing of a 00-40H. |
|
| Author: | Freeman [ Tue Jul 16, 2019 7:13 pm ] |
| Post subject: | Re: 00 Martin 12 fret |
I made my own from some triple ought plans. Found the basic width of the bouts, lenght, waist, et al and just drew the curves (I've got a spreadsheet of measurements from several different guitar I could send to you). Kept the bracing, sound hole, scale all the same. Mine is all mahogany like a 00-17 or one of the new SCGC, its a fun little blues box. Obviously the amount you scallop should be determined more by the wood than some plans Attachment: IMG_1019-1.jpg Attachment: IMG_1660.JPG
|
|
| Author: | Tim L [ Tue Jul 16, 2019 8:34 pm ] |
| Post subject: | Re: 00 Martin 12 fret |
I do have loose plans from a 1927 00-21. It its a tracing of the body, and as I measured, bracing locations and size. It is on poster weight, maybe a bit heavier, paper. I don't have specs for the neck on paper. Not sure what type of print you are looking for and this is not a print. Not sure how I would make it anything other than what it is, which is my interpretation of my 1927 00-21 T |
|
| Author: | Brad Goodman [ Tue Jul 16, 2019 9:22 pm ] |
| Post subject: | Re: 00 Martin 12 fret |
This is how I do mine. Sent from my iPhone using Tapatalk |
|
| Author: | Ruby50 [ Wed Jul 17, 2019 4:37 pm ] |
| Post subject: | Re: 00 Martin 12 fret |
Got one - thanks all Ed |
|
| Author: | DanKirkland [ Wed Jul 17, 2019 7:49 pm ] |
| Post subject: | Re: 00 Martin 12 fret |
Brad Goodman wrote: ]img]https://uploads.tapatalk-cdn.com/20190717/2690fd52fc234652c1a1431cf9b62aa4.jpg[/img] This is how I do mine. Can I pay you for a copy with a pair of socks? |
|
| Author: | Brad Goodman [ Thu Jul 18, 2019 1:02 am ] |
| Post subject: | Re: 00 Martin 12 fret |
DanKirkland wrote: Brad Goodman wrote: ]img]https://uploads.tapatalk-cdn.com/20190717/2690fd52fc234652c1a1431cf9b62aa4.jpg[/img] This is how I do mine. Can I pay you for a copy with a pair of socks? I knew someone was going to say something ... |
|
| Author: | guitarjtb [ Thu Jul 18, 2019 6:23 am ] |
| Post subject: | Re: 00 Martin 12 fret |
Brad Goodman wrote: DanKirkland wrote: Brad Goodman wrote: ]img]https://uploads.tapatalk-cdn.com/20190717/2690fd52fc234652c1a1431cf9b62aa4.jpg[/img] This is how I do mine. Can I pay you for a copy with a pair of socks? I knew someone was going to say something ... Edit/Crop is your friend. Attachment: planssanstoe.jpg
|
|
| Author: | Ken Nagy [ Thu Jul 18, 2019 8:48 am ] |
| Post subject: | Re: 00 Martin 12 fret |
I'm slow. I didn't catch that until the last post. You would think that I'd notice because I've been caught doing that same thing before, but with mine, people even noticed the toe fungus on my big toe. Really? Doesn't bother me. I do a lot of outlines from pictures because I can't find posters, or drawings for the ones I like. I guess on guitars, the bracing details is the most important. |
|
| Author: | Tim L [ Thu Jul 18, 2019 10:26 am ] |
| Post subject: | Re: 00 Martin 12 fret |
The first picture does show that Brad doesn't drop many chisels and knows how to dance when he does. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|