| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Rattlecan Nitro - how many coats? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=52322 |
Page 1 of 1 |
| Author: | Mark Mc [ Sun Sep 01, 2019 3:55 pm ] |
| Post subject: | Rattlecan Nitro - how many coats? |
I have built half a dozen guitars and have used various hand-applied oil finishes. I have no experience with sprayed finishes. I have recently re-topped my first build (after 10 years it failed from some rookie bracing mistakes). I need to finish the top, but I am happy to leave the Tru-Oil finish which is on the back and sides. I have some rattlecan nitro I could try. Can you give me some beginners tips? How many coats? Do I do a couple and then level, and add a couple more? I am looking for satin rather than gloss. |
|
| Author: | bluescreek [ Sun Sep 01, 2019 6:42 pm ] |
| Post subject: | Re: Rattlecan Nitro - how many coats? |
this depends on the way you prep your guitar and the brand of nitro. here is a posting I did on this subject from filling sealing and finish http://www.kitguitarsforum.com/board/vi ... wax+finish |
|
| Author: | phavriluk [ Sun Sep 01, 2019 7:04 pm ] |
| Post subject: | Re: Rattlecan Nitro - how many coats? |
No harm in being conservative, what I did was put on a cross-coat, let it dry overnight, level (scrape, block sand), repeat. When I get to a level coat with no shiny spots, apply a last application, done. I took Mr. Hall's advice about using Minwax rattle cans. It worked out really well. |
|
| Author: | Mark Mc [ Mon Sep 02, 2019 3:34 pm ] |
| Post subject: | Re: Rattlecan Nitro - how many coats? |
Thank you gentlemen. I now feel fairly confident to proceed. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|