Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Dec 01, 2024 6:12 am


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Mon Sep 30, 2019 3:17 pm 
Offline
Cocobolo
Cocobolo

Joined: Fri Jan 15, 2016 9:04 pm
Posts: 315
First name: Andy
Status: Professional
Anyone know where I might fight heating blankets that have more than a measly few inches of wire, and don't use a plug so wide I have to grind it off to get it to fit a typical router control? I know ... this seems like elementary stuff, but I can't seem to find such tools designed by someone that actually uses them and thus creates them for functional use. Thanks to anyone that has a lead! Frank Ford would knock these out of the park, if he made them. I want the string winder of bridge blankets.


Top
 Profile  
 
PostPosted: Mon Sep 30, 2019 4:06 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5498
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
I got my FB and FB extension and bridge heat blankets form from Keenovo https://keenovo.store/collections/standard-keenovo-silicone-heaters/products/keenovo-silicone-heating-blanket-musical-instrument-guitar-ukulele-mandolin-side-bending-wood-working-pvc-board-sheet-bending-heater
ebay outlet https://www.ebay.co.uk/usr/keenovo?_trksid=p2047675.l2559
Work fine, I use my own shop built PID heat controller, not any of theirs.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
PostPosted: Mon Sep 30, 2019 5:13 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Jan 28, 2008 5:21 am
Posts: 4905
Location: Central PA
First name: john
Last Name: hall
City: Hegins
State: pa
Zip/Postal Code: 17938
Country: usa
Focus: Build
Status: Professional
I have them on my site

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Co President of ASIA
You Don't know what you don't know until you know it


Top
 Profile  
 
PostPosted: Mon Sep 30, 2019 5:31 pm 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 19, 2013 7:33 am
Posts: 1876
First name: Willard
Last Name: Guthrie
City: Cumberland
State: Maryland 21502
Zip/Postal Code: 21502
Country: United State
Focus: Repair
Status: Semi-pro
Timely post - we just retired our bridge blanket for failure of the lead at the blanket. Our next will get pickled in high temp copper RTV and spliced to a 24" section of zip cord with overmolded plug.

I suspect the problem is that the manufacturers deliver the blankets with the leads in the raw - just the wire and jacket, without the molded cover seen on the larger blankets. Even with shrink-wrap, it makes the wire exit from the blanket a flex/failure & wear point. If some enterprising supplier would spec the same cord for the bridge, bridge plate, and fretboard blankets as they do for the full-sized blankets, we'd gladly pay more for a more durable, reliable product.

_________________
For the times they are a changin'

- Bob Dylan


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 32 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com