| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Saddle width preference? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=52492 |
Page 1 of 1 |
| Author: | sdsollod [ Tue Oct 01, 2019 9:03 am ] |
| Post subject: | Saddle width preference? |
What is your saddle width preference? I have been using 3/32", but considering other widths... |
|
| Author: | Colin North [ Tue Oct 01, 2019 9:17 am ] |
| Post subject: | Re: Saddle width preference? |
1/8", bit more space for intonation. |
|
| Author: | joshnothing [ Tue Oct 01, 2019 10:34 pm ] |
| Post subject: | Re: Saddle width preference? |
I've never gone thinner than 1/8". Think I'm going to start going thicker. |
|
| Author: | bluescreek [ Wed Oct 02, 2019 10:29 am ] |
| Post subject: | Re: Saddle width preference? |
.100 is as thick as I do you don't need much more once you dial in the location |
|
| Author: | bftobin [ Wed Oct 02, 2019 3:50 pm ] |
| Post subject: | Re: Saddle width preference? |
.125 because it gives me a little more room to work with. Like I always say,'There's three kinds of people in this world, those are good with math and those who aren't.' Brent |
|
| Author: | Tim Mullin [ Wed Oct 02, 2019 8:56 pm ] |
| Post subject: | Saddle width preference? |
Duplicate post |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|