| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| truss rod channel http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=52607 |
Page 1 of 1 |
| Author: | Conor_Searl [ Mon Nov 04, 2019 7:44 pm ] |
| Post subject: | truss rod channel |
How firm should the fit be for a truss rod into the channel? Right now my two way stew mac truss rod requires me to push it into the channel quite firmly. I can get it in and out but it is tight. |
|
| Author: | Chris Pile [ Mon Nov 04, 2019 7:56 pm ] |
| Post subject: | Re: truss rod channel |
Probably okay. |
|
| Author: | Freeman [ Mon Nov 04, 2019 7:58 pm ] |
| Post subject: | Re: truss rod channel |
LMII truss rods have two little bumps on each of the end blocks that hold the rod in place and requires a fairly good tap to set them into the wood. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|