| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Thinner clear pickguard material http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=52848 |
Page 1 of 1 |
| Author: | Michaeldc [ Fri Jan 24, 2020 12:31 pm ] |
| Post subject: | Thinner clear pickguard material |
I'm looking to source thinner clear pickguard material. Something around .002" would be great. Preferably adhesive back. I've got the .005" stuff from SM already. Thanks, M |
|
| Author: | meddlingfool [ Fri Jan 24, 2020 12:40 pm ] |
| Post subject: | Re: Thinner clear pickguard material |
What are you hoping for? I’ve found pg to be sonically invisible... |
|
| Author: | Michaeldc [ Fri Jan 24, 2020 12:44 pm ] |
| Post subject: | Re: Thinner clear pickguard material |
meddlingfool wrote: What are you hoping for? I’ve found pg to be sonically invisible... Hi Ed, It's about aesthetics. My customer wants it to be thinner than the .005" I've got on hand. .002" would be perfect! M |
|
| Author: | meddlingfool [ Fri Jan 24, 2020 4:59 pm ] |
| Post subject: | Re: Thinner clear pickguard material |
Sadly I can't help as all the stuff I have comes in at .007. If you find anything, let us know. I'm out of satin pg's which is a bit of a pickle for me..l |
|
| Author: | Barry Daniels [ Fri Jan 24, 2020 5:12 pm ] |
| Post subject: | Re: Thinner clear pickguard material |
.002" wouldn't be much protection. That is about like saran wrap. |
|
| Author: | Michaeldc [ Fri Jan 24, 2020 7:07 pm ] |
| Post subject: | Re: Thinner clear pickguard material |
Barry Daniels wrote: .002" wouldn't be much protection. That is about like saran wrap. Yup, brought that up. |
|
| Author: | Michaeldc [ Sat Jan 25, 2020 8:16 am ] |
| Post subject: | Re: Thinner clear pickguard material |
meddlingfool wrote: Sadly I can't help as all the stuff I have comes in at .007. If you find anything, let us know. I'm out of satin pg's which is a bit of a pickle for me..l I found an adhesive back product called Dura-lar that comes in .002 and .005. Unfortunately it only comes in gloss. They do make a .005 matte product but without the adhesive back. Testing to follow. https://www.grafixarts.com/products/dura-lar-film/ |
|
| Author: | Michaeldc [ Sat Jan 25, 2020 11:46 am ] |
| Post subject: | Re: Thinner clear pickguard material |
Barry Daniels wrote: .002" wouldn't be much protection. That is about like saran wrap. Most of the folks that own my guitars are members of the press-on nails and superglue brigade. They tend to rest their sharp pinky and ring finger nails on the top which puts lovely little dents in an unprotected top. I’m guessing that the .002” PG will be enough protection for these types. Best, M |
|
| Author: | Barry Daniels [ Thu Jan 30, 2020 10:23 am ] |
| Post subject: | Re: Thinner clear pickguard material |
That makes sense. I more used to the heavy flat pick brigade. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|