Official Luthiers Forum!

For those here who own 6 x 48 belt sanders, what brand/model do you have?

Thanks.

_________________
ELEVATE || Next Level Lutherie
http://elevatelutherie.com
&
http://ensorguitars.com

Mine is a Jet J-4210K with a 10" disc. I like it a lot. The attachment is for thinning headstocks, scalloping brace ends and that sort of thing.

_________________
Steve Smith
"Music is what feelings sound like"

Delta 31-300 (No longer made)

M

20 year old cast iron made in USA Delta... It's a beast!

You can find these on Craigslist-you just have to be patient.

I also have a Taiwanese Powermatic 6 X 89 that I use more than the 6 X 48 becase it flips up to give me a 90 degree table.

One of the tall ship shops I work in has a 1 year old Jet that has the belt and a 12" disc. Heavy machine, very stable and smooth, easy to change belts with one handle so changing grits is easy. Never seems to need belt alignment even when switching. Dust collection is not the best. WE have the 1.5 HP motor because we are working on big pieces of very hard wood, but less would be fine for a guitar shop.

Seems to be this one:

https://www.jettools.com/us/en/p/jsg-6dck-6-x-48-belt-12-disc-sander-with-open-stand/708599K

Ed

24 yr old delta cast iron.replaced bearings Its on its 3 rd motor a recycled 1/2 hp sears. Works ok belt tracking and changes a PITA.

Rockwood
similar to the jet above

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Co President of ASIA
You Don't know what you don't know until you know it

I should take a pic and post it but our's is over 50 years old and was Dan Erlewine's Dad's back in the day. This is one of the tools that was used in the ground zero Luthier development that happened in our area in the 60's. Not only Dan got his start with our belt sander and in Ann Arbor but Bryan Galloup and Dan were early collaborators and so too was Herb David. Herb's was where John Lennon visited and Clapton with his Paisley SG. Our shop is part of this heritage.

Anyway my home shop had for a while, I no longer have it because I intentionally downsized when I got a commercial, well equipped shop a RIKON that worked great for me when I was building. No issues with it and not very pricy either.

Grizzly 6X48 with 10" disc. Going strong daily after 30 years with 1 easy bearing change in the rollers about 15 years ago.

Mike Franks
www.mjfranksguitars.com

Delta/Rockwell 31 series vintage 6x48. I don't run a disc with it.
I also have a little 8" homecraft disc sander I modified to run very slow

_________________
Burton
http://www.legeytinstruments.com
Brookline, MA.

Delta 31-695


Pat

_________________
Pat