| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Source for Martin style T bar for truss rod. http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=53015 |
Page 1 of 1 |
| Author: | guitarjtb [ Sat Mar 14, 2020 12:45 pm ] |
| Post subject: | Source for Martin style T bar for truss rod. |
Anyone have a source for 1/2" steel t bar for neck reinforcement. They used to be sold as sled runners, but sled runners have a different shape now. The steel in the t bar is a hair under 3/32" thick, (.095 I think), and 1/2" X 1/2". Is Martin still using them in the Authentics? |
|
| Author: | meddlingfool [ Sat Mar 14, 2020 2:30 pm ] |
| Post subject: | Re: Source for Martin style T bar for truss rod. |
Pretty sure Japarts here in Vancouver can set you up. He gave me one a few years back but I don't trust non adjustable trusses... |
|
| Author: | guitarjtb [ Wed Mar 18, 2020 8:03 am ] |
| Post subject: | Re: Source for Martin style T bar for truss rod. |
meddlingfool wrote: Pretty sure Japarts here in Vancouver can set you up. He gave me one a few years back but I don't trust non adjustable trusses... Thanks for the info. They show them on their website, so I ordered some, paid for them, and just got this email: I've just refunded your payment. We will still be sending you the bridge pins you ordered but the truss rods have been discontinued. I'm very sorry for the inconvenience |
|
| Author: | John Arnold [ Wed Mar 18, 2020 9:30 am ] |
| Post subject: | Re: Source for Martin style T bar for truss rod. |
James, I have gotten several from Mark Demaray. https://r.tapatalk.com/shareLink/topic? ... source=app John Sent from my SM-G950U1 using Tapatalk |
|
| Author: | bluescreek [ Wed Mar 18, 2020 6:50 pm ] |
| Post subject: | Re: Source for Martin style T bar for truss rod. |
I have them on my site. |
|
| Author: | John Arnold [ Thu Mar 19, 2020 1:57 pm ] |
| Post subject: | Re: Source for Martin style T bar for truss rod. |
What is the height of the current Martin tee bar? Sent from my SM-G950U1 using Tapatalk |
|
| Author: | bluescreek [ Fri Mar 20, 2020 6:07 am ] |
| Post subject: | Re: Source for Martin style T bar for truss rod. |
1/2 in |
|
| Author: | John Arnold [ Mon Mar 23, 2020 7:20 pm ] |
| Post subject: | Re: Source for Martin style T bar for truss rod. |
Interesting. I just measured the rout in an Authentic neck and it was 0.400" tall. |
|
| Author: | bluescreek [ Tue Mar 24, 2020 6:01 am ] |
| Post subject: | Re: Source for Martin style T bar for truss rod. |
they fit a martin neck perfectly. I am an authorized martin shop and got them to fit necks from Martin. |
|
| Author: | bluescreek [ Tue Mar 24, 2020 6:11 am ] |
| Post subject: | Re: Source for Martin style T bar for truss rod. |
just measured .5 wide .4 deep trusted memory at my age not a good thing |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|