| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| BS Blades Supplier http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=53135 |
Page 1 of 1 |
| Author: | Ernie Kleinman [ Mon Apr 20, 2020 9:10 am ] |
| Post subject: | BS Blades Supplier |
My current supplier(edge mfg) pulled their online catalog off and discontinued their co(sawblde express) to amalgamate their operations . So they want us to wait for another month for their online catalog and then order by Phone. I have 6 Bandsaws that I need blades for ., Checked out bandsaw blades direct . I had ordered a ct blade from them in the past, several yrs ago , and it broke twice and had to be rewelded. Any thoughts on a reliable, reasonably priced supplier of good bs blades. Thanks in advance. |
|
| Author: | bobgramann [ Mon Apr 20, 2020 9:51 am ] |
| Post subject: | Re: BS Blades Supplier |
Call Iturra Design 904-642-2802 or go to Spectrum Supply http://www.spectrumsupply.com |
|
| Author: | windsurfer [ Mon Apr 20, 2020 10:24 am ] |
| Post subject: | Re: BS Blades Supplier |
I have also had good dealings with Spectrum supply over many years. |
|
| Author: | Bri [ Mon Apr 20, 2020 10:43 am ] |
| Post subject: | Re: BS Blades Supplier |
Spectrum has always had the best pricing I could find. B |
|
| Author: | Ernie Kleinman [ Mon Apr 20, 2020 12:07 pm ] |
| Post subject: | Re: BS Blades Supplier |
Spectrum it is i will call them. TNX everyone!! |
|
| Author: | bluescreek [ Mon Apr 20, 2020 7:34 pm ] |
| Post subject: | Re: BS Blades Supplier |
gm bandsaw http://www.gmbandsaw.com/ |
|
| Author: | Ernie Kleinman [ Mon Apr 20, 2020 8:11 pm ] |
| Post subject: | Re: BS Blades Supplier |
PS for 103$ and 6 bandsaw blades SS wants 71$ ups and $62 for usps shipping |
|
| Author: | Pegasusguitars [ Mon Apr 20, 2020 10:34 pm ] |
| Post subject: | Re: BS Blades Supplier |
Ernie, If you have 6 bandsaws, you might think about buying coil stock and making your own for anything under 1/2". Larger is doable, but small blades are easy. Big savings. You don't need a welder. Brazing with propane or MAP works just fine, in fact it works better than welding. I've been brazing blades for local woodworkers for over 30 years and they seldom break. Having your own coil stock will cause you to change blades when they are dull, instead of when they break. Sharp blades are great!--Bob |
|
| Author: | Ernie Kleinman [ Tue Apr 21, 2020 7:51 am ] |
| Post subject: | Re: BS Blades Supplier |
Thats a good idea bob.. didnt think of that one!. Is there a supplier from the mainland that you prefer? 4 of the bandsaws take 3/8in blades 10 in craftsman, 9 in ryobi , 12in craftsman , and 12in delta. Or, do you get your coil stock from a wholesaler or e bay ?? . I like to use vy thin blades on the 2 smaller saws. We also have a mini max s 45 takes 5/8or / 3/4in blades and the laguna takes 1 in or 1 .25 in blade Thanks, |
|
| Author: | windsurfer [ Tue Apr 21, 2020 10:17 am ] |
| Post subject: | Re: BS Blades Supplier |
Ernie Kleinman wrote: PS for 103$ and 6 bandsaw blades SS wants 71$ ups and $62 for usps shipping Ouch. I have never paid anywhere close to that for shipping from spectrum. Went on their web site just now and they want 38 shipping USPS for 3 blades and that is the cheapest option. Maybe something is wrong with their shipping calculator? I have always ordered over the phone. |
|
| Author: | Ernie Kleinman [ Tue Apr 21, 2020 1:06 pm ] |
| Post subject: | Re: BS Blades Supplier |
PPS . I got a fone call this aft from SS and yes it was a computer error. No one at SS answered the phone yesterday , so I ordered online , thats where the calculator went awry. I wound up paying $30 for the shipping this aft, If u return to the forum BOB I/m still interested in learning where to buy the coil stock ? . John you were correct . I thought that shipping cost seemed vy high. |
|
| Author: | BobHowell [ Wed Apr 22, 2020 4:30 pm ] |
| Post subject: | Re: BS Blades Supplier |
Ordered 5-6 times from SS and the shipping given is always higher than actual. Estimate of sorts. |
|
| Author: | Ernie Kleinman [ Wed May 06, 2020 9:44 am ] |
| Post subject: | Re: BS Blades Supplier |
I called them (spectrum) 2 weeks ago and only got a reply that they got my order . Contacted them again Monday , and they said no more welds. So who knows , they could be temporarily not working due to the virus. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|