Brad Goodman wrote:
What do you expect from Ziricote?
Welcome to the club!!
Welcome to the club!!
That’s not Mexican crackwood aka Zircote,
That’s a 3and a half inch thick slab of good old smellybelly wood
I would not bother you with ziricote...
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| I hate cracks http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=53336 |
Page 1 of 1 |
| Author: | Herr Dalbergia [ Tue Jul 07, 2020 11:55 pm ] |
| Post subject: | I hate cracks |
Hope, expectations, reality, disapointment, despair I fu.....ing HATE cracks |
|
| Author: | Herr Dalbergia [ Wed Jul 08, 2020 12:04 am ] |
| Post subject: | Re: I hate cracks |
And now....no idea....fretboards or take the risk and Resaw into slices for back and sides.....and end up with 200 headplates? HELP I need somebody HELP Ain’t there anybody.... https://photos.app.goo.gl/sRyrFTpMysYUSqft8 |
|
| Author: | jfmckenna [ Wed Jul 08, 2020 9:41 am ] |
| Post subject: | Re: I hate cracks |
What else can you do but try and fit the patterns like it looks like you are doing? There is always a certain amount of waste, sucks but alas that's wood. |
|
| Author: | bcombs510 [ Wed Jul 08, 2020 11:18 am ] |
| Post subject: | Re: I hate cracks |
Looks cool though! Sent from my iPhone using Tapatalk Pro |
|
| Author: | Brad Goodman [ Wed Jul 08, 2020 1:03 pm ] |
| Post subject: | Re: I hate cracks |
What do you expect from Ziricote? Welcome to the club!! |
|
| Author: | Herr Dalbergia [ Wed Jul 08, 2020 1:32 pm ] |
| Post subject: | Re: I hate cracks |
Brad Goodman wrote: What do you expect from Ziricote? Welcome to the club!! That’s not Mexican crackwood aka Zircote, That’s a 3and a half inch thick slab of good old smellybelly wood I would not bother you with ziricote...
|
|
| Author: | joshnothing [ Wed Jul 08, 2020 6:06 pm ] |
| Post subject: | Re: I hate cracks |
uke sets? 
|
|
| Author: | Clay S. [ Thu Jul 09, 2020 6:07 am ] |
| Post subject: | Re: I hate cracks |
If you have a market for three piece backs that might make life easier. Guitar back and sides are probably the most lucrative use for that species, but there are other markets for it. |
|
| Author: | A.Hix [ Thu Jul 09, 2020 9:36 am ] |
| Post subject: | Re: I hate cracks |
I have the same issue with several huge planks of BRW.. One solution is 3 or 4 piece backs.. |
|
| Author: | Brad Goodman [ Thu Jul 09, 2020 1:56 pm ] |
| Post subject: | Re: I hate cracks |
Herr Dalbergia wrote: Brad Goodman wrote: What do you expect from Ziricote? Welcome to the club!! That’s not Mexican crackwood aka Zircote, That’s a 3and a half inch thick slab of good old smellybelly wood I would not bother you with ziricote... Ok, I'll bite What is "smellybelly wood? |
|
| Author: | Herr Dalbergia [ Thu Jul 09, 2020 2:57 pm ] |
| Post subject: | Re: I hate cracks |
BRW |
|
| Author: | banjopicks [ Thu Jul 09, 2020 3:10 pm ] |
| Post subject: | Re: I hate cracks |
A.Hix wrote: I have the same issue with several huge planks of BRW.. One solution is 3 or 4 piece backs.. I wish I had that issue. |
|
| Author: | SnowManSnow [ Fri Jul 10, 2020 10:34 am ] |
| Post subject: | Re: I hate cracks |
looks like a few really AWESOME live edge table tops!! |
|
| Author: | Clay S. [ Fri Jul 10, 2020 10:44 am ] |
| Post subject: | Re: I hate cracks |
"looks like a few really AWESOME live edge table tops!!" The Horror! The Horror! |
|
| Author: | Herr Dalbergia [ Fri Jul 10, 2020 11:21 am ] |
| Post subject: | Re: I hate cracks |
Clay S. wrote: "looks like a few really AWESOME live edge table tops!!" The Horror! The Horror! Hahahahaha.........for sure no table top I dislike these river epoxy live edge table tops a bit....just too much these days No I think I take the risk and resaw it. 4 piece backs always work, and if I can’t get any sides I have to search another piece....
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|