| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| case recommendations http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=53389 |
Page 1 of 1 |
| Author: | Tai Fu [ Thu Jul 30, 2020 10:31 pm ] |
| Post subject: | case recommendations |
Any recommendations for a guitar case for builds? I bought cases from Taobao, and they are adequate for cheap Washburns, but I don't trust my build with them. They are not airtight and certainly not watertight, so it means there's no way to make sure it will not get too humid (Taiwan is extremely humid). So I was hoping for Ameritage case but I have contacted them and they have not replied. So I'm wondering if they are even in business anymore. I noticed they are not OLF sponsors anymore. So can you guys recommend a good case other than Calton (the customer thinks that is too expensive)? Budget is around 300-500 dollars. |
|
| Author: | TRein [ Fri Jul 31, 2020 4:58 pm ] |
| Post subject: | Re: case recommendations |
I have found Hiscox cases to be high on the cost/value scale. |
|
| Author: | Colin North [ Fri Jul 31, 2020 5:22 pm ] |
| Post subject: | Re: case recommendations |
Same here, Hiscox cases are good value. |
|
| Author: | WaddyThomson [ Sun Aug 02, 2020 9:08 am ] |
| Post subject: | Re: case recommendations |
Visenut Cases fall into your price range I believe. Nice case. A little more attractive ( and more expensive) than the Hiscox, which is what I usually use, and has an adjustable interior system. Brune has a builder price for them, unless something has changed. What am I thinking? Narongsak Visenut is in Taiwan. |
|
| Author: | Colin North [ Sun Aug 02, 2020 9:31 am ] |
| Post subject: | Re: case recommendations |
Aiersi brand carbon Fiber glass Guitar Hard Case-? Seems to be in your price range |
|
| Author: | Tai Fu [ Sun Aug 02, 2020 10:02 am ] |
| Post subject: | Re: case recommendations |
Colin North wrote: Aiersi brand carbon Fiber glass Guitar Hard Case-? Seems to be in your price range Have you personally tried it? It looks like it's made in China and I see a lot of carbon fiber flight cases from Taobao made by similar manufacturers. Can they survive the abuse Calton can? I heard of BAM cases, and also looks like a few Taiwanese makers too. I can't find the prices for Hiscox cases, the site wouldn't provide the prices. I just got an email back from Ameritage and they offered luthier pricing which is very good. I don't know how good Ameritage is but from what I heard it's good. |
|
| Author: | Colin North [ Sun Aug 02, 2020 11:11 am ] |
| Post subject: | Re: case recommendations |
Bam and Calton both well out of your price range. |
|
| Author: | Jim Watts [ Sun Aug 02, 2020 8:47 pm ] |
| Post subject: | Re: case recommendations |
Hiscox here too. Great cases! |
|
| Author: | SteveSmith [ Sun Aug 02, 2020 8:51 pm ] |
| Post subject: | Re: case recommendations |
Jim Watts wrote: Hiscox here too. Great cases! Yep
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|