How do you guys that know do this with the sound hole?
I'm talking about the rosewood or darker wood around the hole
Always been a mystery to me
Sent from my SM-A715F using Tapatalk
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| How do you do this? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=53406 |
Page 1 of 1 |
| Author: | cablepuller1 [ Sat Aug 08, 2020 3:44 pm ] |
| Post subject: | How do you do this? |
How do you guys that know do this with the sound hole? I'm talking about the rosewood or darker wood around the hole Always been a mystery to me Sent from my SM-A715F using Tapatalk |
|
| Author: | bcombs510 [ Sat Aug 08, 2020 3:57 pm ] |
| Post subject: | Re: How do you do this? |
What I have done, someone mentioned it here first, is inlay a larger ring before cutting the soundhole. The top has to be thick enough that you can inlay the hardwood ring a few thousandths thicker than your soundboard will be when you thin it down. So for example, the top is .125 and you inlay a ring that is .115 and then cut your soundhole. Then take the top down to .110. It looks like the hole was bound but it wasn’t. Now, what you end up with is that the edge of the sound hole is now endgrain, which some may not like. I even heard someone say the endgrain can affect tone (might be a stretch  ).Make sense?   Brad Sent from my iPhone using Tapatalk Pro |
|
| Author: | Joe Beaver [ Sat Aug 08, 2020 4:05 pm ] |
| Post subject: | Re: How do you do this? |
Pretty cool Brad |
|
| Author: | bcombs510 [ Sat Aug 08, 2020 4:39 pm ] |
| Post subject: | Re: How do you do this? |
Here is where I saw it first I think. Jay’s comment about half way down: Soundhole reinforcement https://r.tapatalk.com/shareLink/topic? ... source=app Hopefully that link works.  Sent from my iPhone using Tapatalk Pro |
|
| Author: | J De Rocher [ Sat Aug 08, 2020 6:37 pm ] |
| Post subject: | Re: How do you do this? |
bcombs510 wrote: Here is where I saw it first I think. Jay’s comment about half way down: And I learned that technique from Rick Davis. |
|
| Author: | Ruby50 [ Sun Aug 09, 2020 8:01 am ] |
| Post subject: | Re: How do you do this? |
The technique also works for a piece of binding Ed |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|