Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Some nice Tasmanian timbers
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=53484
Page 1 of 1

Author:  martintaylor [ Fri Sep 04, 2020 12:47 am ]
Post subject:  Some nice Tasmanian timbers

This Classical build uses mainly Tasmanian timbers. Nice to be able to use local timbers in a lockdown!

Blackheart Sassafras back and sides, King Billy Soundboard, Tiger Myrtle Fretboard, bridge and armrest, Fijian Mahogany neck (nearly local!). It is lightly fan braced in a Hauseresque style.

The rosette was a neighbours tree that came down a couple of years ago. I think it was a Casuarina of some type Nicely spalted now.

Attachment:
IMG_6163.jpg


Attachment:
IMG_6164.jpg


Attachment:
IMG_6170.jpg


Attachment:
IMG_6171.jpg


Attachment:
IMG_6174.jpg


Attachment:
IMG_6175.jpg


Attachment:
IMG_6176.jpg

Author:  Colin North [ Fri Sep 04, 2020 1:13 am ]
Post subject:  Re: Some nice Tasmanian timbers

I'd say that was spectacularly successful.
P.S. Didn't know Groots were local down under. duh

Author:  Dave m2 [ Fri Sep 04, 2020 12:32 pm ]
Post subject:  Re: Some nice Tasmanian timbers

Martin that is very fine. You got that inlay in very neatly. And that back is extremely flash.

How did the KB pine work out for the top? Did you measure the properties to decide on thickness?

Dave

Author:  martintaylor [ Sun Sep 13, 2020 11:18 pm ]
Post subject:  Re: Some nice Tasmanian timbers

Dave m2 wrote:
Martin that is very fine. You got that inlay in very neatly. And that back is extremely flash.

How did the KB pine work out for the top? Did you measure the properties to decide on thickness?

Dave



Hi Dave,

This was some very old dry KB that I have had for a while. I compared it to some Engelmann Spruce and some Western Red Cedar I have and it was pretty much right in between. Stiff, light and good long resonance. I'd say the final outcome is a little warmer than my Spruce topped classicals but brighter than a cedar one.

Martin

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/