Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Bog oak sides
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=53548		 Page 1 of 1
Author:  cablepuller1 [ Sat Sep 26, 2020 7:31 am ]
Post subject:  Bog oak sides
Hi

Any experience here bending Bog Oak sides
What thickness and heat works well

TiaImage

Sent from my SM-A715F using Tapatalk
Author:  bluescreek [ Sat Sep 26, 2020 8:22 am ]
Post subject:  Re: Bog oak sides
try .075 in thick
heat to 275 bend
keep well damp
once bent allow heat to go to 350F
then set to 275F for 10 min allow to cool
Author:  jfmckenna [ Sat Sep 26, 2020 10:26 am ]
Post subject:  Re: Bog oak sides
I have not bent bog oak yet but I have bent oak White Oak sides on several guitars and my experience is that it bends like butter. I have only ever bent them on a hot pipe though too. I'm curious to know of your experience with the bog oak.
Author:  cablepuller1 [ Sat Sep 26, 2020 11:31 am ]
Post subject:  Re: Bog oak sides
Hopefully it bends well, I'm using a pipe to bend to, seems really flexible

Sent from my SM-A715F using Tapatalk
Author:  Pmaj7 [ Sat Sep 26, 2020 1:44 pm ]
Post subject:  Re: Bog oak sides
IDK, but cool! Is that stuff widely available?

Pat
Author:  cablepuller1 [ Sun Sep 27, 2020 1:43 am ]
Post subject:  Re: Bog oak sides
Pmaj7 wrote:
IDK, but cool! Is that stuff widely available?

Pat
Not many dealers in UK but found a Guy who supplies it to Lowden and a few other big name builders, absolutely love the fact its so old, hes had some of the sets carbon dated to 4000+ years old. My mind was blown

Sent from my SM-A715F using Tapatalk
Author:  Herr Dalbergia [ Thu Oct 01, 2020 8:44 am ]
Post subject:  Re: Bog oak sides
https://photos.app.goo.gl/2CtAD19R6oVoE4CM7

I also like that stuff......
Author:  Pmaj7 [ Thu Oct 01, 2020 11:44 am ]
Post subject:  Re: Bog oak sides
Wow, cool! How can we get that stuff??

Pat
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/