| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| feather board http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=53563 |
Page 1 of 1 |
| Author: | wbergman [ Thu Oct 01, 2020 12:48 pm ] |
| Post subject: | feather board |
Bought one only to find it is for small slots. Searching the Internet, I do not see specs. that specifically say it will work in my SawStop, which has 1" x 1/2" T-slots. Please point me to an appropriate product. |
|
| Author: | Michaeldc [ Thu Oct 01, 2020 1:45 pm ] |
| Post subject: | Re: feather board |
I use one of these on my resaw and really like it! https://magswitch.com/product/universal-featherboard/ M |
|
| Author: | Pmaj7 [ Thu Oct 01, 2020 2:39 pm ] |
| Post subject: | Re: feather board |
Michaeldc wrote: I use one of these on my resaw and really like it! https://magswitch.com/product/universal-featherboard/ Do you stack a couple of them up for resawing? I've always thought they looked convenient but wondered about the practicality for resawing and 8-in board.M Pat |
|
| Author: | Michaeldc [ Thu Oct 01, 2020 3:45 pm ] |
| Post subject: | Re: feather board |
Pmaj7 wrote: Michaeldc wrote: I use one of these on my resaw and really like it! https://magswitch.com/product/universal-featherboard/ Do you stack a couple of them up for resawing? I've always thought they looked convenient but wondered about the practicality for resawing and 8-in board.M Pat I just use the one. I’ve got the drift master fence so the stock is advanced using a crank handle that moves the fence towards the blade for each slice. Pretty sweet rig, wish it was a better built tool. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|