| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| SilverTip pore fill http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=53584 |
Page 1 of 1 |
| Author: | James Orr [ Sat Oct 10, 2020 3:06 pm ] |
| Post subject: | SilverTip pore fill |
A few questions for those of you using System Three SilverTip for pore fill. Are you thickening with Cab-O-Sil? Where are you getting it? Are you using the slow or fast hardener? |
|
| Author: | Michaeldc [ Sat Oct 10, 2020 3:41 pm ] |
| Post subject: | Re: SilverTip pore fill |
James Orr wrote: A few questions for those of you using System Three SilverTip for pore fill. Are you thickening with Cab-O-Sil? Where are you getting it? Are you using the slow or fast hardener? Hey James, No on Cab-o-sil I personally buy mine at Edensaw woods, But on-line works too. Fast Hardener. Best, M |
|
| Author: | doncaparker [ Sat Oct 10, 2020 4:42 pm ] |
| Post subject: | Re: SilverTip pore fill |
No silicone thickener for me. I probably bought the Silver Tip on eBay. I use the fast hardener, too. |
|
| Author: | J De Rocher [ Sat Oct 10, 2020 6:05 pm ] |
| Post subject: | Re: SilverTip pore fill |
I think I remember Jay Lichty recommending against using Cab-o-sil in his EM6000 finishing video. Unfortunately, the video is no longer available on his web site so I can't check that. Anyone here remember one way or the other about that? Michael - Do you remember if John Greven said he was still using it when he gave his presentation to the Seattle Luthiers Group? |
|
| Author: | doncaparker [ Sat Oct 10, 2020 6:31 pm ] |
| Post subject: | Re: SilverTip pore fill |
The Jay Lichty video is still available, but now you have to pay for it at Robbie O'Brien's website. It really is a great video. I have not paid for it, because I watched it umpteen times when it was free. But I might pay for it at some point. It's quite the resource. |
|
| Author: | James Orr [ Sat Oct 10, 2020 6:47 pm ] |
| Post subject: | SilverTip pore fill |
Thanks, everyone! I actually have the Lichty video saved in my luthiers playlist on YouTube. It’s still alive and active: https://youtu.be/FXr9jYoikcA I’ve been using Z-Poxy since #1 and without issue (and also really like the way it pops figure), but SilverTip definitely seems to be the best practice with Enduro-Var from reading through the threads last night. Sent from my iPhone using Tapatalk |
|
| Author: | J De Rocher [ Sat Oct 10, 2020 6:59 pm ] |
| Post subject: | Re: SilverTip pore fill |
James Orr wrote: I actually have the Lichty video saved in my luthiers playlist on YouTube. It’s still alive and active: https://youtu.be/FXr9jYoikcA Thanks for the link! Much appreciated. At 17:10 in the video, he added a banner that says he no longer uses silica thickener in the epoxy because it's a health hazard. |
|
| Author: | Bill Higgs [ Sat Oct 10, 2020 8:31 pm ] |
| Post subject: | Re: SilverTip pore fill |
John Greven recently told me that he no longer uses silver tip. |
|
| Author: | Jim Watts [ Sat Oct 10, 2020 9:40 pm ] |
| Post subject: | Re: SilverTip pore fill |
doncaparker wrote: No silicone thickener for me. I probably bought the Silver Tip on eBay. I use the fast hardener, too. This should be cleared up. Cab-O-Sil contains no silicone. It's fumed silica, totally different substance from silicone. |
|
| Author: | doncaparker [ Sat Oct 10, 2020 9:54 pm ] |
| Post subject: | Re: SilverTip pore fill |
My slip of the tongue; sorry. I don’t use it, so I wasn’t careful with the language. |
|
| Author: | Jim Watts [ Sat Oct 10, 2020 10:04 pm ] |
| Post subject: | Re: SilverTip pore fill |
No problem, I just didn't want people to not to use because they were afraid of the silicone. Fumed silica like cabosil is an industry standard for thickening resins among other things. It's closer to sand than silicone. |
|
| Author: | James Orr [ Sun Oct 11, 2020 12:37 am ] |
| Post subject: | Re: SilverTip pore fill |
Bill Higgs wrote: John Greven recently told me that he no longer uses silver tip. Did he mention what he’s using instead? There sure seems to be a lot of experience on the forum with SilverTip if someone runs into problems, but it would be interesting to know. Sent from my iPhone using Tapatalk |
|
| Author: | Colin North [ Sun Oct 11, 2020 6:24 am ] |
| Post subject: | Re: SilverTip pore fill |
Just for info, because Silvertip's not available here in UK, I've been using BSI FINISH-CURE™ 20 MIN EPOXY without any filler successfully - because it's virtually clear. I did adhesion tests and there's not any problems. |
|
| Author: | Michaeldc [ Sun Oct 11, 2020 7:13 am ] |
| Post subject: | Re: SilverTip pore fill |
J De Rocher wrote: I think I remember Jay Lichty recommending against using Cab-o-sil in his EM6000 finishing video. Unfortunately, the video is no longer available on his web site so I can't check that. Anyone here remember one way or the other about that? Michael - Do you remember if John Greven said he was still using it when he gave his presentation to the Seattle Luthiers Group? I don’t recall, Jay |
|
| Author: | Bill Higgs [ Sun Oct 11, 2020 6:59 pm ] |
| Post subject: | Re: SilverTip pore fill |
James, He has been using a Canadian product called SAMAN Latex Wood Filler lately. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|