Anyone know how to fix this?
Sent from my iPhone using Tapatalk
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Drum Sander Conveyer... http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=53698 |
Page 1 of 1 |
| Author: | meddlingfool [ Sat Nov 21, 2020 6:44 pm ] |
| Post subject: | Drum Sander Conveyer... |
Anyone know how to fix this? Sent from my iPhone using Tapatalk |
|
| Author: | Ken Lewis [ Sat Nov 21, 2020 7:22 pm ] |
| Post subject: | Re: Drum Sander Conveyer... |
Epoxy, couple flat cauls and clamps. You'll need to remove to do a proper job I would think. Then order a new one for when it goes kaput again. 
|
|
| Author: | meddlingfool [ Sat Nov 21, 2020 8:06 pm ] |
| Post subject: | Re: Drum Sander Conveyer... |
For some reason CA didn’t work, lol. Maybe epoxy would... |
|
| Author: | doncaparker [ Sat Nov 21, 2020 8:18 pm ] |
| Post subject: | Re: Drum Sander Conveyer... |
I would “fix” it with a purchase of a new one from Klingspor. |
|
| Author: | meddlingfool [ Sat Nov 21, 2020 10:35 pm ] |
| Post subject: | Re: Drum Sander Conveyer... |
Yes, I think that’s the best duct tape too... |
|
| Author: | Clay S. [ Sat Nov 21, 2020 10:48 pm ] |
| Post subject: | Re: Drum Sander Conveyer... |
You might try sanding both sides of the seam lightly and using the clear gorilla tape. |
|
| Author: | meddlingfool [ Sun Nov 22, 2020 3:41 am ] |
| Post subject: | Re: Drum Sander Conveyer... |
I think I'm going to go from ffix it yourself poorly and wreck your project straight into replace it with a new one dumba** with no intervening steps... |
|
| Author: | Clay S. [ Sun Nov 22, 2020 11:47 am ] |
| Post subject: | Re: Drum Sander Conveyer... |
meddlingfool wrote: I think I'm going to go from ffix it yourself poorly and wreck your project straight into replace it with a new one dumba** with no intervening steps... As a professional who really needs the machine that is often your best option. You may even want to keep a spare ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
|
|
| Author: | Alain Lambert [ Sun Nov 22, 2020 5:19 pm ] |
| Post subject: | Re: Drum Sander Conveyer... |
I would use a more flexible glue than epoxy. Possibly polyurethane glue. |
|
| Author: | windsurfer [ Sun Nov 22, 2020 8:57 pm ] |
| Post subject: | Re: Drum Sander Conveyer... |
I glued mine with e6000, a flexible silicone adhesive. It lasted until the replacement arrived from Klingspoor. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|