| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Amplifier Logo's Marshall Clone http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=53732 |
Page 1 of 1 |
| Author: | jfmckenna [ Fri Dec 04, 2020 12:23 pm ] |
| Post subject: | Amplifier Logo's Marshall Clone |
I'm making an 18 watt Marshall clone from a Mojo Tone kit this weekend and got to thinking. It's a head and cabinet. The head is the large unit like the size of a Plexi. My last name is McKenna and I thought it would be fun to have a plastic logo made out using my last name in the Marshall style font. Does anyone know anyone who might do that sort of thing? This might be the wrong forum to ask about this sort of thing but I thought I would start here. Regards. |
|
| Author: | Skarsaune [ Fri Dec 04, 2020 12:58 pm ] |
| Post subject: | Re: Amplifier Logo's Marshall Clone |
Pretty much anyone with a CNC... |
|
| Author: | jfmckenna [ Fri Dec 04, 2020 1:57 pm ] |
| Post subject: | Re: Amplifier Logo's Marshall Clone |
To be a bit more specific, any one in the guitar business? I'd rather spend dollars here then out there on the iNternet. |
|
| Author: | dzsmith [ Sat Dec 12, 2020 9:10 pm ] |
| Post subject: | Re: Amplifier Logo's Marshall Clone |
Ask our friend Andy Birko if he can do it. |
|
| Author: | Tai Fu [ Tue Dec 15, 2020 11:43 pm ] |
| Post subject: | Re: Amplifier Logo's Marshall Clone |
I got a laser cutter. I can cut anything out of plexiglass for you. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|