| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Latest out the door Wedged OMC http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=53794 |
Page 1 of 1 |
| Author: | Colin North [ Thu Dec 24, 2020 3:16 pm ] |
| Post subject: | Latest out the door Wedged OMC |
Customer sent some pictures, which I didn't get before releasing into the wild. OMC with soundport, 23 mm wedge - EIR with Lutz top, 650 mm scale length Redwood burl rosette Bubinga bindings Swietenia macrophylla neck Honduran Rosewood FB, bridge and Headplate. EnduroVar Gloss Gotoh 510 engraved tuners JJB prestige 330 pickup with volume control |
|
| Author: | James Orr [ Thu Dec 24, 2020 3:21 pm ] |
| Post subject: | Re: Latest out the door Wedged OMC |
Beautiful, Colin. Sent from my iPhone using Tapatalk |
|
| Author: | Chris Pile [ Thu Dec 24, 2020 4:31 pm ] |
| Post subject: | Re: Latest out the door Wedged OMC |
We have a winner! |
|
| Author: | Darrel Friesen [ Thu Dec 24, 2020 4:39 pm ] |
| Post subject: | Re: Latest out the door Wedged OMC |
That's a real looker! The details look flawless. I imagine somebody is going to have a Merry Christmas! |
|
| Author: | jfmckenna [ Thu Dec 24, 2020 4:45 pm ] |
| Post subject: | Re: Latest out the door Wedged OMC |
Very niice. What finish do you use? |
|
| Author: | Colin North [ Thu Dec 24, 2020 5:38 pm ] |
| Post subject: | Re: Latest out the door Wedged OMC |
It's EnduroVar Gloss |
|
| Author: | Dave m2 [ Thu Dec 24, 2020 5:46 pm ] |
| Post subject: | Re: Latest out the door Wedged OMC |
Really nice looking. So what is going on with that bridge? Are the strings terminated at the back of the bridge? Are the circles at the back of the top of the bridge just ornamental? Confused of Combe Florey. DM |
|
| Author: | Colin North [ Thu Dec 24, 2020 5:49 pm ] |
| Post subject: | Re: Latest out the door Wedged OMC |
You mean the Parisian Eyes in the bridge pins? |
|
| Author: | meddlingfool [ Thu Dec 24, 2020 5:54 pm ] |
| Post subject: | Re: Latest out the door Wedged OMC |
Nice! |
|
| Author: | Dave m2 [ Thu Dec 24, 2020 6:14 pm ] |
| Post subject: | Re: Latest out the door Wedged OMC |
Right. Got ya. Couldn’t see the pins clearly. D |
|
| Author: | Colin North [ Thu Dec 24, 2020 6:53 pm ] |
| Post subject: | Re: Latest out the door Wedged OMC |
Yup, sorry about the quality of the pics. |
|
| Author: | bcombs510 [ Fri Dec 25, 2020 8:49 am ] |
| Post subject: | Re: Latest out the door Wedged OMC |
That’s a beauty, Colin! Sent from my iPhone using Tapatalk Pro |
|
| Author: | SteveSmith [ Fri Dec 25, 2020 9:33 am ] |
| Post subject: | Re: Latest out the door Wedged OMC |
That's pretty. Did you have trouble bending the Bubinga for the binding? |
|
| Author: | Colin North [ Fri Dec 25, 2020 11:58 am ] |
| Post subject: | Re: Latest out the door Wedged OMC |
Kind of, bent ok, as close as I could, but had to clamp it in at the cutaway as it didn't confirm to the rise and fall if that makes sense |
|
| Author: | SteveSmith [ Fri Dec 25, 2020 12:12 pm ] |
| Post subject: | Re: Latest out the door Wedged OMC |
Makes sense. I've only bent two sets of Bubinga and they both came from a board I resawed - it was really hard to bend, that's why I was curious. |
|
| Author: | bftobin [ Sat Dec 26, 2020 10:25 am ] |
| Post subject: | Re: Latest out the door Wedged OMC |
A real beauty, Colin. I like tops with that cross-silking. I also like that there's no back strip. With wood that nice you don't need any distraction. Brent |
|
| Author: | Bob Orr [ Sat Dec 26, 2020 5:48 pm ] |
| Post subject: | Re: Latest out the door Wedged OMC |
Lovely work Colin |
|
| Author: | SnowManSnow [ Sat Dec 26, 2020 6:39 pm ] |
| Post subject: | Re: Latest out the door Wedged OMC |
Super cool man. Good job Sent from my iPhone using Tapatalk |
|
| Author: | Clay S. [ Sun Dec 27, 2020 12:16 am ] |
| Post subject: | Re: Latest out the door Wedged OMC |
Nice looking guitar. Those are some fancy looking tuners! |
|
| Author: | Ruby50 [ Sun Dec 27, 2020 12:16 pm ] |
| Post subject: | Re: Latest out the door Wedged OMC |
Good one Ed M |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|