| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Router jig question http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=53952 |
Page 1 of 1 |
| Author: | DanKirkland [ Wed Feb 10, 2021 11:43 pm ] |
| Post subject: | Router jig question |
I've been combing around trying to find the router guide/jig that Greven shows in his retop demo. Anyone know where I can find one or what it's called? I'm an idiot with power tools honestly. |
|
| Author: | Clay S. [ Thu Feb 11, 2021 12:47 am ] |
| Post subject: | Re: Router jig question |
He is using a fairly standard laminate trimmer edge guide. They used to come with some trimmers and are somewhat specific to the router. You can sometimes find them on ebay for not too much money. I use them with an added donut for bindings What type of router do you have? Sometimes you can adapt one brand's attachment to another's. |
|
| Author: | Colin North [ Thu Feb 11, 2021 2:28 am ] |
| Post subject: | Re: Router jig question |
Number of routers guitar builders use, there's got to be thousands going spare. . |
|
| Author: | DanKirkland [ Thu Feb 11, 2021 12:53 pm ] |
| Post subject: | Re: Router jig question |
Clay S. wrote: He is using a fairly standard laminate trimmer edge guide. They used to come with some trimmers and are somewhat specific to the router. You can sometimes find them on ebay for not too much money. I use them with an added donut for bindings What type of router do you have? Sometimes you can adapt one brand's attachment to another's. I have a makita variable speed and one of the Bosch colt routers I also have a rigid one I keep just for binding on my setup. Thanks for the info I'll dig a little further and see what I can find. |
|
| Author: | PatrickW [ Thu Feb 11, 2021 2:03 pm ] |
| Post subject: | Re: Router jig question |
Dan try this, https://www.partswarehouse.com/Makita-T ... ick=365719 You’ll need a makita rt701 trim router to use it with. I have this setup and it works well. Edit: the first link is oos, try this link, https://www.toolnut.com/makita-122703-7 ... 0GEALw_wcB |
|
| Author: | DanKirkland [ Sat Feb 13, 2021 4:52 pm ] |
| Post subject: | Re: Router jig question |
PatrickW wrote: Dan try this, https://www.partswarehouse.com/Makita-T ... ick=365719 You’ll need a makita rt701 trim router to use it with. I have this setup and it works well. Edit: the first link is oos, try this link, https://www.toolnut.com/makita-122703-7 ... 0GEALw_wcB Thanks for that! I got the order placed for it plus a few other things. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|