Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Takamine Bridge Lifting
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=54056		 Page 1 of 1
Author:  Terence Kennedy [ Fri Mar 26, 2021 9:50 am ]
Post subject:  Takamine Bridge Lifting
This is a 90’s Cedar topped Takamine Garth Brooks model with a lifting bridge among other things. Couple of small top cracks you can see in the photos as well. Satin finish.

Question, were these bridges super glued to the finish? I have not started anything on this yet, it was dry and is rehydrating. Just wanted to know if anyone here had experience with lifting bridges on this particular Cedar topped model. It of course has bolts as well and what looks like a large masonite bridge plate which is in good shape.

ImageA785D2F2-0769-41F1-95AD-201CAF702254 by Terence Kennedy, on Flickr

ImageED672DC3-3A69-47FB-B4EC-DAE1E139C3BC by Terence Kennedy, on Flickr
Author:  phavriluk [ Fri Mar 26, 2021 10:04 am ]
Post subject:  Re: Takamine Bridge Lifting
Are the bolts tight? I suspect all will come clear once the strings are off (love this little feature of pinless bridges) and the bolts are either the only attachment for the bridge or backup for glue. I built one with a pinless bridge and I glued that bridge on, no bolts.

That's a really pretty soundboard, too. Nice color, nice silking, nice grain.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/