| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Where do you get Ivoroid sheets? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=54401 |
Page 1 of 1 |
| Author: | jfmckenna [ Fri Sep 10, 2021 2:37 pm ] |
| Post subject: | Where do you get Ivoroid sheets? |
I have purchased from Rothco in the UK before and they are fine but I am just wondering where else you can get sheets big enough to to end graphs. I found one place in MN but the smallest sheet they had is almost $800 bucks!  Big enough to make bindings with but still... Dang. And it was like $130 for Chinese import tariff and another $130 for Hazmat. |
|
| Author: | Pat Foster [ Fri Sep 10, 2021 2:51 pm ] |
| Post subject: | Re: Where do you get Ivoroid sheets? |
Tried Axiom ? axinc.net |
|
| Author: | jfmckenna [ Fri Sep 10, 2021 3:01 pm ] |
| Post subject: | Re: Where do you get Ivoroid sheets? |
Yeah Axiom was the really expensive one. THey don't have small sheets. |
|
| Author: | Clay S. [ Fri Sep 10, 2021 8:24 pm ] |
| Post subject: | Re: Where do you get Ivoroid sheets? |
https://www.ebay.com/itm/191837290069?h ... SwA3dYWpyb They have straight grained and curly ivoroid and some tortoise sheets. I have never dealt with them, but they may be a source for small sheets and pick guard material. |
|
| Author: | Brad Goodman [ Fri Sep 10, 2021 8:53 pm ] |
| Post subject: | Re: Where do you get Ivoroid sheets? |
jfmckenna wrote: Yeah Axiom was the really expensive one. THey don't have small sheets. yes they do....2",4" etc. If you place an order and talk to Bill James the owner he can get you any size you want. Unfortunately you have to pay the $37 hazmat fee |
|
| Author: | bluescreek [ Sat Sep 11, 2021 4:04 pm ] |
| Post subject: | Re: Where do you get Ivoroid sheets? |
gurian instrument |
|
| Author: | banjopicks [ Sun Sep 12, 2021 10:28 am ] |
| Post subject: | Re: Where do you get Ivoroid sheets? |
Why can't someone make these out of some non hazardous material? |
|
| Author: | jfmckenna [ Sun Sep 12, 2021 10:44 am ] |
| Post subject: | Re: Where do you get Ivoroid sheets? |
banjopicks wrote: Why can't someone make these out of dome non hazardous material? What is dome? My guess is that it would not look quite the same. I love the look of Ivoroid and it's easy to install too! |
|
| Author: | banjopicks [ Sun Sep 12, 2021 10:53 am ] |
| Post subject: | Re: Where do you get Ivoroid sheets? |
Stupid spell check and I'm too lazy to read before I post. |
|
| Author: | Woodie G [ Mon Sep 13, 2021 11:58 am ] |
| Post subject: | Re: Where do you get Ivoroid sheets? |
Yes- would not be cellulose nitrate. And I love the camphor smell when scraping the material - sort of spicy. |
|
| Author: | banjopicks [ Mon Sep 13, 2021 12:23 pm ] |
| Post subject: | Re: Where do you get Ivoroid sheets? |
Trust me, I do too and also love the smell of lacquer. I know it's bad bad but it smells like candy to me. If my wife wasn't sensitive to it I would continue to use it but alas, it's EM6000 for this one. |
|
| Author: | jfmckenna [ Mon Sep 13, 2021 1:53 pm ] |
| Post subject: | Re: Where do you get Ivoroid sheets? |
IT does smell god though doesn't it! |
|
| Author: | joshnothing [ Wed Sep 15, 2021 8:01 am ] |
| Post subject: | Re: Where do you get Ivoroid sheets? |
Nitro smells great, gives me an instant headache. I guess that’s the brain cells dying but it sure is more-ish, like the smell of fine vintage leaded gasoline |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|