| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Aryawoods http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=54428 |
Page 1 of 1 |
| Author: | Terence Kennedy [ Tue Sep 21, 2021 9:09 am ] |
| Post subject: | Aryawoods |
Discovered their website and inventory. Good prices. Ordered three Indian Ebony fretboard blanks and they look great. Anyone here worked with Indian Ebony? I have heard it can be little hard on saws and edged tools. Thanks  8D97667F-4915-4EC6-99E6-8B2378569831 by Terence Kennedy, on Flickr
|
|
| Author: | phavriluk [ Tue Sep 21, 2021 9:57 am ] |
| Post subject: | Re: Aryawoods |
I looked around briefly. Nice to see usable wood offered at comfortable pricing. I think us build-for-themselves luthiers (?) can have a fine time and turn up some gorgeous instruments without breaking the bank. Movie money. Just buy your soundboards somewhere else... |
|
| Author: | banjopicks [ Tue Sep 21, 2021 10:06 am ] |
| Post subject: | Re: Aryawoods |
I didn't see anything I couldn't get from SM for the same price and their prices are high. The spruce tops are ridiculous unless you just have to have Alpine spruce. |
|
| Author: | J De Rocher [ Tue Sep 21, 2021 12:51 pm ] |
| Post subject: | Re: Aryawoods |
It bugs me that all of the photos of the back and sides sets show only one side piece. If I'm going to buy a set, I want to see all of it so I know exactly what I'm getting. |
|
| Author: | jfmckenna [ Tue Sep 21, 2021 1:17 pm ] |
| Post subject: | Re: Aryawoods |
When they were selling through the luthiers club on Facebook I was getting great deals. $10 a piece for ebony fret boards and I got some really nice EIR too. The rosewood was of very good quality imho as were the fretboards. But yeah I noticed once they got a website up it's pretty much all market price now. They send emails with specials once in a while though. Over all though they were fast, good to work with and good quality. |
|
| Author: | Terence Kennedy [ Tue Sep 21, 2021 1:24 pm ] |
| Post subject: | Re: Aryawoods |
My question was how are the working properties of Indian Ebony vs. African. Can anyone help me on this one? Mr. McKenna? |
|
| Author: | jfmckenna [ Tue Sep 21, 2021 1:36 pm ] |
| Post subject: | Re: Aryawoods |
Oh sorry I missed the point. Well interestingly I found some things different. I bought several from them, I think 30 at the time. There were a few that actually had curly figure in them. They looked really cool but as you can guess were harder to work. But if you have a drum sander then no worries. Incidentally once they were on the guitar and finished with wax they looked just all black and you could not see the figure. I would tend to agree that working with the Indian Ebony was a bit more moody. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|