When I resaw something and see the blade drift I can hear him yelling in the background - "There should never be drift in a bandsaw!"
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Band Saw Improvements http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=54450 |
Page 1 of 1 |
| Author: | dofthesea [ Sat Oct 02, 2021 6:10 pm ] |
| Post subject: | Band Saw Improvements |
I just bought an old 18" Jet Band Saw. Does anyone know the name of the company that specializes in upgrades and other assorted tricks and details on how to set this thing up? Or any other recommendations? Oh and which blades are best for re-sawing? I have a lot of billets. thanks |
|
| Author: | Pmaj7 [ Sat Oct 02, 2021 6:22 pm ] |
| Post subject: | Re: Band Saw Improvements |
Iturra Design. You have to call or write to him and he will send you the bandsaw bible. Pat |
|
| Author: | dofthesea [ Sat Oct 02, 2021 6:23 pm ] |
| Post subject: | Re: Band Saw Improvements |
Thanks pat |
|
| Author: | Michaeldc [ Sat Oct 02, 2021 6:57 pm ] |
| Post subject: | Re: Band Saw Improvements |
Whoops! |
|
| Author: | Michaeldc [ Sat Oct 02, 2021 6:57 pm ] |
| Post subject: | Re: Band Saw Improvements |
Another improvement option - https://store.bullvalleyhardwood.com/la ... ts-jet-18/ |
|
| Author: | CarlD [ Sat Oct 02, 2021 7:46 pm ] |
| Post subject: | Re: Band Saw Improvements |
I bought a ceramic guide setup from Laguna (Jet18). Took a while to deliver. A bit of drilling and tapping of the saw body to make it work. Runs smooth and true. Much better than the stock roller bearing setup. Search for it in the archives. Ballbanjos had the suggestion and pics to help with the installation. |
|
| Author: | Tasmaniantone [ Sat Oct 02, 2021 10:30 pm ] |
| Post subject: | Re: Band Saw Improvements |
In my humble opinion the best blade for resawing is carbon tipped, they are the bees knees. |
|
| Author: | dofthesea [ Sun Oct 03, 2021 10:34 am ] |
| Post subject: | Re: Band Saw Improvements |
Which brand blade does everyone prefer? I'[d prefer quality over cheap. |
|
| Author: | Darrel Friesen [ Sun Oct 03, 2021 11:08 am ] |
| Post subject: | Re: Band Saw Improvements |
If you haven't already, check out Alex Snodgrass set-up tutorials. Some of the best I've seen. https://youtu.be/wGbZqWac0jU |
|
| Author: | bftobin [ Sun Oct 03, 2021 8:20 pm ] |
| Post subject: | Re: Band Saw Improvements |
dofthesea wrote: Which brand blade does everyone prefer? I'[d prefer quality over cheap. Blade will depend on what you're going to cut and how much you're going to cut. Mostly I use 3/16" and a 1/2" Timberwolf blades. I find I can resaw a lot of woods with a 1/2" blade if they're not high silica woods. For high silica woods, a carbide tipped blade would be in order. |
|
| Author: | SteveSmith [ Mon Oct 04, 2021 5:54 am ] |
| Post subject: | Re: Band Saw Improvements |
I use 1/4” Timberwolf blades in my Rikon 10-325. I do have a wider blade for resawing but haven’t used it in several years and don’t remember what it is. Sent from my iPhone using Tapatalk Pro |
|
| Author: | dofthesea [ Wed Oct 06, 2021 1:02 pm ] |
| Post subject: | Re: Band Saw Improvements |
That video by Alex Snodgrass is the bomb. What a boat load of info. Exactly what I was looking for. |
|
| Author: | bcombs510 [ Wed Oct 06, 2021 1:26 pm ] |
| Post subject: | Re: Band Saw Improvements |
When I resaw something and see the blade drift I can hear him yelling in the background - "There should never be drift in a bandsaw!"
|
|
| Author: | ballbanjos [ Wed Oct 06, 2021 4:58 pm ] |
| Post subject: | Re: Band Saw Improvements |
I use a 1/4" Timberwolf for almost everything on my 18 inch Jet. I have a 3/4" Infinity Rip resaw blade that I use if I'm doing heavy resawing, but actually the 1/4" Timberwolf works fine for most lighter resawing too (like 4 or 5 inches thick). Using the Laguna ceramic guides makes a big difference. I rarely change to a different blade. Dave |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|