| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Adding stain to Aqua Coat clear grain filler http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=54476 |
Page 1 of 1 |
| Author: | Bill Higgs [ Wed Oct 13, 2021 5:39 pm ] |
| Post subject: | Adding stain to Aqua Coat clear grain filler |
Has anyone had experience adding stain to Aqua Coat clear grain filler? I would like to add a little amber tone to it. I talked to Brian at Aqua Coat today and he said to mix stain with about a teaspoon of hot water and use a fork to stir it in. I was thinking of using some ColorTone vintage amber stain. I would like your thoughts if you have any experience at all, for example: concentration used or any other tips. Thanks, Bill |
|
| Author: | SteveSmith [ Wed Oct 13, 2021 5:48 pm ] |
| Post subject: | Adding stain to Aqua Coat clear grain filler |
I just added ColorTone stain to AquaCoat the other day, a little goes a long way. I mixed 4 or 5 drops of dark walnut in about a 1/4 cup of filler because I wanted it pretty dark. Adding the stain to a bit of water may help but I didn't use any extra water and it was fine. Used it on some figured Honduran Rosewood. 
|
|
| Author: | ballbanjos [ Wed Oct 13, 2021 8:30 pm ] |
| Post subject: | Re: Adding stain to Aqua Coat clear grain filler |
Looks great! I'm a big fan of Aquacoat, and the extra dye sure looks good on your rosewood! Dave |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|