| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Orphan Zircote http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=54662 |
Page 1 of 1 |
| Author: | Mike OMelia [ Thu Dec 30, 2021 5:35 pm ] |
| Post subject: | Orphan Zircote |
Anybody have some orphan zircote with good figure? Need to build a rosette. Would take an orphan side. Or something 2" wide, 30" long. Prefer side. Mike |
|
| Author: | Colin North [ Fri Dec 31, 2021 4:45 am ] |
| Post subject: | Re: Orphan Zircote |
I bought a 2" Zircote spindle to slice up tfor a project, maybe something here suitable? - https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=ziricote+turning+blank&_sacat=0&LH_TitleDesc=0&_osacat=0&_odkw=ziricote+turning+blank |
|
| Author: | A.Hix [ Fri Dec 31, 2021 11:52 am ] |
| Post subject: | Re: Orphan Zircote |
I have LOTS. $25 for a nice orphan side. 5"W x 32.5"L |
|
| Author: | Tai Fu [ Sat Jan 01, 2022 8:00 pm ] |
| Post subject: | Re: Orphan Zircote |
I bought some zircote headplate before... those will work for making rosettes. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|