| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| What is going on is this photo http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=54751 |
Page 1 of 1 |
| Author: | Slim [ Sun Feb 06, 2022 12:36 am ] |
| Post subject: | What is going on is this photo |
I’m not familiar with all the different jigs out being used so this one in the pic is new to me. What is going on in in this pic with this router jig is this some sort of thickness jig? |
|
| Author: | Barry Daniels [ Sun Feb 06, 2022 9:12 am ] |
| Post subject: | Re: What is going on is this photo |
Looks like a plate thicknessing setup. |
|
| Author: | Clay S. [ Sun Feb 06, 2022 12:08 pm ] |
| Post subject: | Re: What is going on is this photo |
I think Barry is right. Hopefully there is some sort of hold down (spring loaded?) so the wood doesn't get sucked up into the router bit. |
|
| Author: | Barry Daniels [ Sun Feb 06, 2022 12:26 pm ] |
| Post subject: | Re: What is going on is this photo |
I wouldn't be surprised if that line of holes in the jig aren't spring loaded hold downs. It is actually a pretty clever jig. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|