Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Plastic Binding
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=54801		 Page 1 of 1
Author:  Mike OMelia [ Sat Feb 26, 2022 9:35 am ]
Post subject:  Plastic Binding
I am looking for white ABS or similar.

0.125" tall, 0.04" thick (3mm x 1mm). 36-65" long (1-2 strips)

0.2" tall, 0.04" thick (5mm x 1mm). 36-65" long (2-4 strips)

Anybody have a source? Anybody have some?

Mike
Author:  rbuddy [ Sat Feb 26, 2022 10:32 am ]
Post subject:  Re: Plastic Binding
LMII has some 0.040 thick but it is all 0.250 tall if that would work for you.

https://www.lmii.com/search?controller=search&s=white+plastic+binding
Author:  Mike OMelia [ Sat Feb 26, 2022 10:56 am ]
Post subject:  Re: Plastic Binding
rbuddy wrote:
LMII has some 0.040 thick but it is all 0.250 tall if that would work for you.

https://www.lmii.com/search?controller=search&s=white+plastic+binding



Yes, I just noticed same at Stew Mac. Guess I'll have to cut it down. Not sure how I missed that. Tnx
Author:  Mike OMelia [ Sat Feb 26, 2022 11:55 am ]
Post subject:  Re: Plastic Binding
That macrostie binding trimmer looks quite nice. Don't need here, but may get.
Author:  Barry Daniels [ Sat Feb 26, 2022 12:40 pm ]
Post subject:  Re: Plastic Binding
I've got one of the binding trimmers and it's a remarkable device.
Author:  Mike OMelia [ Sat Feb 26, 2022 2:47 pm ]
Post subject:  Re: Plastic Binding
Barry Daniels wrote:
I've got one of the binding trimmers and it's a remarkable device.


Barry,

Sounds like a solid recommendation. Did you buy the whole system? Also. does it work well with wood?

Mike
Author:  Barry Daniels [ Sat Feb 26, 2022 3:25 pm ]
Post subject:  Re: Plastic Binding
I bought the trimmer only. I use my own router and bit. Yes, it works well with wood or plastic.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/