Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Side Sound Port
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=54922		 Page 1 of 1
Author:  herry tze [ Wed Apr 20, 2022 8:19 am ]
Post subject:  Side Sound Port
Hi, I'm building Tinozza Acoustic Bass (fretless), my plan from RM Motolla and I need sugesstion. When I make side sound port (as a main sound hole).
At top sound board no sound hole. is the fan bracing need to compensate or just like the plan? thank you [uncle]
Author:  herry tze [ Wed Apr 20, 2022 9:06 am ]
Post subject:  Re: Side Sound Port
herry tze wrote:
Hi, I'm building Tinozza Acoustic Bass (fretless), my plan from RM Motolla and I need sugesstion. When I make side sound port (as a main sound hole).
At top sound board no sound hole. is the fan bracing need to compensate or just like the plan? thank you [uncle]
herry tze wrote:
Hi, I'm building Tinozza Acoustic Bass (fretless), my plan from RM Motolla and I need sugesstion. When I make side sound port (as a main sound hole).
At top sound board no sound hole. is the fan bracing need to compensate or just like the plan? thank you [uncle]

this guitar photo made by Morgan Kelsey Guitar
Author:  rmmottola [ Thu Apr 21, 2022 9:06 am ]
Post subject:  Re: Side Sound Port
Hello Herry,

No changes are needed to the top bracing for this soundhole placement. I would strongly suggest that the soundhole area in the ribs should be considerably reinforced though. Best of luck.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/