That's a good source Clay. I have however gotten lazy in my years and like to buy already cut
And actually I have miles of black and white plastic purfs.
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Ivoroid binding with white ABS purfling http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=55149 |
Page 1 of 1 |
| Author: | jfmckenna [ Fri Jul 22, 2022 5:23 pm ] |
| Post subject: | Ivoroid binding with white ABS purfling |
Will that just look terrible? I like Ivoroid a lot and have never used ABS before but dang is it very white. This guitar will be finished in a dark shellac so I wonder if that would even it out? Anyone know what Martin does on their D-45's for example? The ones that use Ivoroid, do they use very thin Ivoroid purfling to get that black/white lines? Fiber perhaps? If so where would I even get something like that? Cheers |
|
| Author: | bluescreek [ Fri Jul 22, 2022 5:39 pm ] |
| Post subject: | Re: Ivoroid binding with white ABS purfling |
nope Martin did that for years |
|
| Author: | jfmckenna [ Fri Jul 22, 2022 5:42 pm ] |
| Post subject: | Re: Ivoroid binding with white ABS purfling |
Ok good to know, thanks John. |
|
| Author: | Clay S. [ Fri Jul 22, 2022 5:43 pm ] |
| Post subject: | Re: Ivoroid binding with white ABS purfling |
Cabinet shops often carry thin edgebanding in various shades of white which may be a good match to ivoroid bindings. Edgeco also sells rolls which would furnish a lifetime supply: https://edgecoinc.com/ Typing ivory into the search header brings up 6 different color variations 15/16ths inch wide X .018 inches thick. A cabinet shop should sell you 10-12 feet for a few bucks (some might even give it away). |
|
| Author: | jfmckenna [ Sat Jul 23, 2022 12:48 pm ] |
| Post subject: | Re: Ivoroid binding with white ABS purfling |
That's a good source Clay. I have however gotten lazy in my years and like to buy already cut And actually I have miles of black and white plastic purfs. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|